I dun goofed. After the engine lay too long without a head , this happened
https://imgur.com/6wImUI3
The corrosion is on the thrust axis I belive, I can easily catch my fingernail on it. It's 1cm long and half that wide. It covers at most 5 percent of the cylinder.
So rehone it...I can't. I neither have the tools nor the ability to give the block to a mechanic as at that point I would've replaced the engine entirely.

I am glad I loved you. It is worth its weight in joy and gold. I had Heaven for a brief moment in my life. I felt like someone up there loved me to send you into my life. When you left, I went straight to hell. It was hard to crawl my way out, and I left a part of myself behind there, when I pulled myself back to the safety of Earth. Knowing Heaven, and not being able to reach it, makes life bittersweet. It’s no one’s fault. I cannot help my feelings for people any more than I control the weather. If that were the case, it would be 72, partly cloudy with a nice breeze every day. That was what you were to me. My perfect weather. I’m sorry my storm clouds ruined that.
I’m working on me. I’m trying to get my lightening and thunder to stop hitting the people I love. Please don’t leave me in the rain alone to weather this storm. He doesn’t know how to help- it’s not his fault. I am too much, and not enough simultaneously.
And you are my safe place, whether you like it or not. I’m sorry for that. If I could remove myself as a piece to this puzzle and replace it with someone else I would, but checking out isn’t going to help anything anymore. It’s not a solution, just a tbc. I don’t want that for either of us. We can’t keep putting off the pain to deal with it in later lives.
This is awful and creates more bad karma. Please return to me, in whatever capacity you can, where you are is where I belong.
We need to put our demons to bed. Before they destroy us both. There’s only one way to do that. Come meet me. Let me look at your face, and into your eyes. The first time is always the hardest.
Please.

I apologize for being so ignorant on this topic I literally know nothing besides some minor research. Please bare with me!
I recently, for the first time, bought some UV resin printed models off of Etsy from a popular vendor. All the reviews were positive so I felt confident to buy from them.
When I received the models I noticed that some parts of the models had a wet look / wet film on them. I started cutting out the left over supports, but the more pieces I opened I realized it was most likely uncured resin on the models. The base of the model was the worst because still had a significant amount of wet resin coming out of the holes of the base.
After realizing I wiped my tools and workspace with a Clorox wipe and then washed my hands because I knew you shouldn’t be touching this stuff with your bare hands.
My first set of questions are how do I harden or cure the rest of the wet resin? Do I put it in the sun to finish curing? Wipe off the excess with isopropyl alcohol?
Second, how deep of a clean do I need to do with my tools / workstation that got the uncured resin on it? Was wiping it down with a Clorox wipe enough?
I did contact the seller and they apologized, but told me I could handle the model with the wet resin with my bare hands if I didn’t have gloves and to use isopropyl alcohol. I didn’t know if I should trust them after they said I could handle it with my bare hands so I came here.

❤Material: The garlic press rolling part is made of stainless steel and the handle is made of environmental grade ASB. Durable and safe. Don’t rust.
❤Design: This new garlic press with an arc shape, the handle is suitable for human ergonomic to hand it. Comfortable and easy to handle. It’s doesn’t take much effort.
https://zafyn.com/collections/new-products/products/easy-garlic-pressing-tool
​
https://reddit.com/link/1408w9h/video/o2uqbca2nl261/player
❤Easy to use: Simply place on top of garlic clove and rock back and forth. Easily crush or mince garlic, ginger, and onion in half the time!
❤Easy to clean: The excess residue can be easily removed by washing with water. Saving much of your time. It is also suitable for a dishwasher.
❤You can use this garlic press to press the garlic. It can increase the food delicious. It’s a great gift for chef, foodie, or garlic lover.
Item ID: M2674 Features: Color:black Weight: 106g Size: 10.7*5.1*6.9cm (4.21"×2.0"×2.71") Main Materials: stainless steel 430+ ABS Packing Includes: 1 X EASY GARLIC PRESSING TOOL
Please Note: 1. Please allow 1-3cm error due to manual measurement. 2. Please understand that colors may exist chromatic
https://zafyn.com/collections/new-products/products/easy-garlic-pressing-tool

Get the course here: [Download Course] Dan Koe – Digital Economics Masters Degree (Genkicourses.site)
Our website: https://www.genkicourses.site/product/dan-koe-digital-economics-masters-degree/
​

Phase 0) Digital Economics 101

The Digital Economics 101 module will open 1 week prior to the cohort start date.This is an onboarding module that will get you up to speed so we can get straight into the material.This will be required to finish before the start date.

• Gain a deep understanding of all of the pieces in the digital economy.
• Learn about the future of media and code — the front-end and backend of the internet — so you can focus your efforts.
• Understand digital leverage, distribution, no-code tools, and digital assets so you can take part in the mental & financial wealth transfer.

Phase 1) Creating A Meaningful Niche

Every day I hear people going on and on about trying to find their niche.I also hear people talking about how they don’t know how to combine what they love talking about with what will sell.You already have the answer. You just don’t have the clarity.

• Develop a long-term strategy to create your own niche — meaning you don’t have to worry about your “competition” playing status games.
• Discover your life’s work, curiosities, and obsessions. I see too many people that are uncertain about this for years.
• Cultivate and turn your vision, goals, and values into a brand that attracts an audience you love interacting with (and that will buy from you, and only you).

Phase 2) Content Strategy

There is one thing that separates those who make it in the digital economy and those who don’t.It’s the quality, articulation, and perceived originality of their content.The content you post has to make sense to the people you attract.Everyone has a different voice and tone that they resonate with. That they are congruent with and trust.It has to change their thought patterns or behavior — that’s what makes you memorable.That’s what separates you from the sea of people posting surface-level copy-cat style posts.Example and putting my money where my mouth is:

• Become an expert-level speaker or writer on the topics you care about.
• Never run out of content ideas for your posts or promotions (without using content templates — that’s how you stay a commodity).
• Create posts, blogs, tweets, images, and videos that resonate with other’s on a deep level. People will actually ask you how you got so good at what you do.
• Separate yourself from the ocean of B-tier creators that struggle to sell their products, services, andhave their ideas stick in the head of their audience.
• Implement our Epistemic Research Method — which is just a fancy way of saying scientific research method… but it’s for researching your mind to craft brilliant content and product ideas.

Phase 3) Crafting Your Offer

Most people are sitting on a goldmine of skills, experience, and knowledge (that they can use to help people 1-2 steps behind them).That is what people pay for.Considering 95% of the market are beginners… if you are good at something, you can help them get to your level (no matter how “basic” you think the information is).Do you not watch basic content all day anyway? People don’t want new information, they want to be reminded of what works.

• Use our Minimum Viable Offer strategy to start monetizing immediately (and have something to improve over time, rather than procrastinating until it’s perfect).
• Have a strategy for reducing the time you spend working over time (as you build leverage and improve your offer).
• Know how to create your own customers from the audience you are building, instead of “finding” the right customer for your offer.
• Take the guesswork out of building coaching, consulting, or digital product offers.

Phase 4) Marketing Strategy

You aren’t making money because you aren’t promoting yourself or your offer.That is literally the only way to make money. Have something desirable and consistently put it in front of peoples’ faces.In Phase 4, I will show you how to systemize, automate, and be consistent with simple promotions.You will be able to make money without having the chance of forgetting to do it (or letting fear of failure get in the way).

• Learn to sell on social media, in your writing, and across different platforms.
• Have consistent sales coming in while focusing on your meaningful message (no need to sound salesy all the time).
• Learn advanced automation strategies that you can implement at your own pace, especially once you validate your offer.

Bonus) The Creator Command Center

The Creator Command Center is a Notion template that houses all of the systems.This is how you will manage your brand, content, offer creation, marketing strategy, and systemized promotions for consistent sales.

Bonus) Live Product Build & Launch

In the first Digital Economics Cohort, I built out my course The 2 Hour Writer.I have videos showing how I build it with the strategies in phase 3 and 4.There is a bonus module that shows how I had an $85,000 launch that resulted in my first $100K month.I did this to prove the strategies inside Digital Economics work if you stick to the plan.And, this past Black Friday, I blew my that monthly high out of the water in 4 days.That’s the power of these strategies if you stay consistent with your life’s work.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
​
If you're wondering why our courses are priced lower than the original prices and are feeling a bit suspicious (which is understandable), we can provide proof of the course's contents. We can provide a screenshot of the course's contents or send you a freebie, such as an introduction video or another video from the course, to prove that we do have the course. Should you wish to request proof, we kindly ask you to reach out to us.
Please be aware that our courses do not include community access. This is due to the fact that we do not have the authority to manage this feature. Despite our desire to incorporate this aspect, it is, unfortunately, unfeasible.
Explore affordable learning at Genkicourses.site 🎓! Dive into a world of quality courses handpicked just for you. Download, watch, and achieve more without breaking your budget.

Thanks to u/Nessmuk58 for the idea
The goal this offseason is simple, building a roster to win next season. There could be multiple ways to do that, but here is one possible option:

• Re-Sign Draymond 4/90

It’s a fair deal and he’s a massive part of what we do here. Enough said

• Trade JP + Moody + 19 +25,26,27 2nd for DFS + Dinwiddie

Im not doing these terrible Poole deals for these middling role players like Olynyk or these huge risks like Isaac. If the goal is salary dumping then you trade the older and bigger salary, no one dumps 24 year olds. I’m either going all out for a star, or I’m grabbing 2 role players, one of which is an elite role player who I think could start on a lot of contenders. I think this is a pretty good win for both sides. The Nets can’t tank, so the best thing they can do right now is to retool while getting younger. The Nets need scoring, and Poole is a more than capable #2 option behind Bridges and an upgrade over Dinwiddie but you need to surround him with great defense. Do Mikal Bridges, Cam Johnson, Royce O’Neale, and Claxton sound like good defenders? I sure think so. Meanwhile we get another great defensive wing and a good Poole replacement. Now the Nets may be valuing DFS at 3 firsts, but since he’s 30 years old I’ll value him at around 2. Again I do think JP is a Dinwiddie upgrade, especially for the Nets. I think Moody and 3 seconds will make up the difference, if not we can swap out a few seconds for a future first.
Then I’d like to sign a spacing big, I’ll go with what looks to be this sub’s dream choice in Dario Saric.
I’ll also sign Serge Ibaka. Not because I want to play him, but to use him in certain matchups like Jokic for some post physicality and a couple fouls. Won’t hurt. Could also sign Dwight instead but he seems to embrace Taiwan right now (LOL).
This leaves us with 1 more signing, and since we now have 3 non-Dray bigs and Wiggins, Kuminga, GP2, AND DFS for defense, I think it’s obvious we go emergency point guard. I personally would like a vet like Goran, but because it’s a guy who barely plays I’ll go Ty Jerome. I personally do not think he’s good, but he’s on Kerr’s good side and for the most part should be a garbage time player.
This leaves us with:
PG: Steph SG: Klay SF: Wiggins PF: Dray C: Looney
Dinwiddie GP2 DFS Kuminga Dario Saric
PBJ Rollins Jerome Serge Ibaka
And 3 2 ways.
This to me looks like we’re not actually downgrading our team for the sake of moving Poole, but spreading out the talent among multiple positions.

Amateur welder here. I was taught by professionals, but I haven’t welded since I learned a few years ago.
Looking to change up some parts of a car frame and I need a hood to do it.
I have a 3M 7800S gas mask that I use for painting and when cutting metal. 3M sells a clip on visor for welding to use with this gas mask.
Does anyone have experience with it? Or should I just buy a harbor freight helmet?
The clip-on visor for my gas mask is about $300 https://www.airgas.com/product/Safety-Products/Respiratory-Protection/Respiratory-Accessories/p/3MR7990
Edit: I’m not sure it clips on, but replaces the regular visor for the mask. But that’s pedantic.

My cistern always runs, there's not much going into the pan, but it needs sorting.
I've lifted and cleaned the red rubber bit and the white plastic part or sits on but it's still running. Is there anything else I can do other than replace the red rubber bit? I assume this is why it's leaking? inside my cistern

2.26.0.36 -> 2.26.0.40 Part 1

• VBCI 2 (MCT-30) : Max field repair time lowered
• Game parameter changes :
  • New Burn mark parameters :
    • Ship radius = 7
    • Ship position push multiplier = 5
    • Ship direction push multiplier = 1.15
  • Ground TWS is now called TWS GTM
  • Damage Model parameter changes :
    • Visual Shrapnel Inner Radius : 0.15 -> 0.05
    • Radiators :
      • Repair speed lowered by 65%
      • It can now be repaired to 100%
  • Physical material parameter changes :
    • All, except Bricks, Concrete, Metal, Wood and Football ramp : "iak" : 0.2 -> 0.5
    • Football ramp : "iak" : 0.2 -> 1
    • Track friction on concrete : 0.9 -> 0.95
    • Wheel friction on concrete : 0.8 -> 0.95
• Sound changes :
  • Tank engines : Max sounds in the 20-400 m radius : 8 -> 16
  • Tracks : Max radius : 200 -> 300 m
  • New engine sound : BTR-80
  • Some long-rod APFSDS now use the APCR loading crew voice

Aircraft changes :

• A6M3 :
  • Added custom loadouts
  • New loadout : 1x Drop tank (stock)
  • Loadout changed : 2x 60kg : Removed Required modification 9 in (mod30)
• Buccaneer S. Mk. 1, Kfir Canard : Updated cockpit
• D4Y3 : Loadout changed : 3x 250 kg : Bombs are now dropped separately
• F-4C, F-4E, F-4EJ (all), F-4F (all), F-4S : Drop tank :
  • Fuel mass : 2271 -> 1850 kg
  • Now visible in menu
• F-4E (ISR) : Drop tank :
  • Fuel mass : 2271 -> 1850 kg
  • Model : US -> ISR
  • Now visible in menu
• F-4E Kurnass 2000 :
  • Updated cockpit
  • Engines : Engine armor -> Jet engine armor
  • New loadout : 6x Python 3
  • Loadout changed : x Empty (stock) -> 1x Drop tank (stock)
  • Removed loadouts:
    • 4x AIM-7E-2
    • 4x AIM-7F
  • Custom loadout changes :
    • Slot 3, 9 changed : Added 2x Python 3 option, can't be equipped together with 3x AGM-65D on slot 2
    • Slot 4, 8 changed :
      • Removed 1x AIM-7E-2 option
      • Removed 1x AIM-7F option
    • Slot 5 changed :
      • Option changed : 1x AIM-9G (stock), can't be equipped together with 1x AIM-7E-2 on slot 4 or 1x AIM-7F on slot 4 or 2x BLU-27/B on slot 6 -> 1x AIM-9G (stock), can't be equipped together with 2x BLU-27/B on slot 6
      • Option changed : 1x AIM-9L, can't be equipped together with 1x AIM-7E-2 on slot 4 or 1x AIM-7F on slot 4 or 2x BLU-27/B on slot 6 -> 1x AIM-9L, can't be equipped together with 2x BLU-27/B on slot 6
      • Added 1x Python 3 option, can't be equipped together with 2x BLU-27/B on slot 6
      • Removed 1x AIM-7E-2 option
      • Removed 1x AIM-7F option
    • Slot 6 changed : Added 1x Drop tank (stock) option
    • Slot 7 changed :
      • Option changed : 1x AIM-9G (stock), can't be equipped together with 1x AIM-7E-2 on slot 8 or 1x AIM-7F on slot 8 or 2x BLU-27/B on slot 6 -> 1x AIM-9G (stock), can't be equipped together with 2x BLU-27/B on slot 6
      • Option changed : 1x AIM-9L, can't be equipped together with 1x AIM-7E-2 on slot 8 or 1x AIM-7F on slot 8 or 2x BLU-27/B on slot 6 -> 1x AIM-9L, can't be equipped together with 2x BLU-27/B on slot 6
      • Added 1x Python 3 option, can't be equipped together with 2x BLU-27/B on slot 6
      • Removed 1x AIM-7E-2 option
      • Removed 1x AIM-7F option
• F-4J :
  • Added ejection seat
  • New loadout : 1x Drop tank (stock)
  • Custom loadout changes :
    • Max load : 7257 -> 7400 kg
    • Slot 6 changed : Added 1x Drop tank (stock) option
• F-4J (UK), Phantom F.G. Mk. 1, Phantom F.G.R. Mk. 2 :
  • Added ejection seat
  • New loadout : 1x Drop tank (stock)
  • Custom loadout changes : Slot 6 changed : Added 1x Drop tank (stock) option
• F-14B :
  • Targeting pod camera moved
  • New loadout : 2x GBU-24/B + 1x LANTIRN
  • Loadouts changed :
    • 4x AIM-9L + 320x Flares / Chaff -> 4x AIM-9L + 640x Flares / Chaff
    • 1x GBU-10/B : Required modification changed : GBU-10 -> GBU-10/24
  • Custom loadout changes :
    • Slot 2, 5 changed :
      • Added 160x Flares / Chaff option
      • Added 160x Flares / Chaff + 1x AIM-9L (stock) option
    • Slot 3 changed :
      • Option changed : 1x AIM-7M, can't be equipped together with 1x GBU-10/B on slot 5 -> 1x AIM-7M, can't be equipped together with 1x GBU-10/B on slot 5 or 1x GBU-24/B on slot 5
      • Option changed : 2x AIM-7M, can't be equipped together with 1x AIM-54A on slot 5 or 1x AIM-54C on slot 5 or 1x 500lb on slot 5 or 1x 1000 lb on slot 5 or 1x 2000lb on slot 5 or 1x GBU-10/B on slot 5 or 1x Mk. 82 AIR on slot 5 or 1x Mk 83 AIR on slot 5 -> 2x AIM-7M, can't be equipped together with 1x AIM-54A on slot 5 or 1x AIM-54C on slot 5 or 1x 500lb on slot 5 or 1x 1000 lb on slot 5 or 1x 2000lb on slot 5 or 1x GBU-10/B on slot 5 or 1x Mk. 82 AIR on slot 5 or 1x Mk 83 AIR on slot 5 or 1x GBU-24/B on slot 5
      • Option changed : 2x AIM-54A, can't be equipped together with 1x 2000lb on slot 5 or 1x GBU-10/B on slot 5 -> 2x AIM-54A, can't be equipped together with 1x 2000lb on slot 5 or 1x GBU-10/B on slot 5 or 1x GBU-24/B on slot 5
      • Option changed : 2x AIM-54C, can't be equipped together with 1x 2000lb on slot 5 or 1x GBU-10/B on slot 5 -> 2x AIM-54C, can't be equipped together with 1x 2000lb on slot 5 or 1x GBU-10/B on slot 5 or 1x GBU-24/B on slot 5
      • Added 1x GBU-24/B option, must be equipped together with 1x LANTIRN on slot 7
    • Slot 4 changed : Added 1x GBU-24/B option, must be equipped together with 1x LANTIRN on slot 7
• F-16A-10 (ISR) :
  • New loadout : 6x Python 3
  • Custom loadout changes : Slot 1, 2, 3, 7, 8, 9 changed : Added 1x Python 3 option
• G.91 3 :
  • New loadout : 2x Canon de 30mm DEFA 552 + 2x Mk. 82 Snakeye
  • Custom loadout changes : Slot 2, 5 changed :Added 1x Mk. 82 Snakeye option
• G.91 4 (all) :
  • New loadout : 4x Machine Gun, Caliber .50, AN/M3 + 2x Mk. 82 Snakeye
  • Custom loadout changes : Slot 2, 5 changed : Added 1x Mk. 82 Snakeye option
• G.91 Y :
  • New loadouts :
    • 2x AA.20
    • 2x AS.20
    • 2x AS.30
    • 4x Mk. 82 Snakeye
  • Custom loadout changes :
    • Slot 1, 4 changed : Added 1x Mk. 82 Snakeye option
    • Slot 2, 3 changed :
      • Added 1x Mk. 82 Snakeye option
      • Added 1x AS.20 option
      • Added 1x AA.20 option
      • Added 1x AS.30 option
• G.91 YS :
  • New loadout : 4x Mk. 82 Snakeye
  • Custom loadout changes : Slot 2, 3, 4, 5 changed : Added 1x Mk. 82 Snakeye option
• GL 832 HY :
  • Float offset : 0.6 -> 0.4
  • DM rewritten
• Harrier G.R. Mk. 7 : Sight zoom : 1.51x / 1.86x -> 1.88x -> 6x
• Il-2 (1941) :
  • Loadouts changed :
    • 4x FAB-100 + 4x RBS-132 -> 4x FAB-100 + 8x RBS-132
    • 4x RBS-132 -> 8x RBS-132
    • 4x ROFS-132 -> 8x ROFS-132
    • 4x ROS-132 -> 8x ROS-132
  • Custom loadout changes : Slot 1, 6 changed :
    • Option changed : 2x ROS-132 -> 4x ROS-132
    • Option changed : 2x ROFS-132 -> 4x ROFS-132
    • Option changed : 2x RBS-132 -> 4x RBS-132
• J8 (all) :
  • New loadouts :
    • 2x 500-4
    • 2x Model 500-3
  • Custom loadout changes : Slot 2, 6 changed :
    • Added 1x Model 500-3 option
    • Added 1x 500-4 option
• Kfir C2 :
  • Updated cockpit
  • New loadouts :
    • 76x 2.75-inch FFAR Mk. 4 + 4x 500lb + 2x Python 3
    • 4x 500lb + 16x FFAR MK 32 MOD 0 + 2x Python 3
    • 4x 1000 lb + 2x Python 3
    • 2x 2000lb + 2x Python 3
    • 8x M117 + 2x Python 3
    • 2x Python 3
  • Removed loadouts :
    • 76x 2.75-inch FFAR Mk. 4 + 4x 500lb + 2x AIM-9G
    • 4x 500lb + 2x AIM-9G + 16x FFAR MK 32 MOD 0
    • 4x 1000 lb + 2x AIM-9G
    • 2x 2000lb + 2x AIM-9G
    • 2x AIM-9G + 8x M117
  • Custom loadout changes : Slot 1, 7 changed : Added 1x Python 3 option
• Kfir C7 :
  • Updated cockpit
  • New loadout : 4x Python 3
  • Custom loadout changes : Slot 1, 2, 6, 7 changed : Added 1x Python 3 option
• Ki 45 Kai Tei, Ki 84 (all) : Loadout changed : 2x 250 kg : Bombs are now dropped separately
• MiG-23 (all), MiG-27 (all) : Drop tank fuel mass : 800 -> 650 kg
• Mirage 2000-5F : Targeting pod zoom = 6.15x / 98.21x
• N1K2-Ja : Loadout changed : 4x 60 kg : Bombs are now dropped separately
• PBY-5A (late) (FR) : Side turrets : 12.7 mm AN/M2 -> 12.7 mm AN/M2 (late)
• Su-17 (all), Su-22 (all) : Drop tank fuel mass : 1600 -> 1300 kg
• Su-25T :
  • Drop tank fuel mass : 1600 -> 1300 kg
  • Targeting pod NVD :
    • Resolution : 500x300 -> 900x500
    • Light multiplier : 12 -> 8
  • New loadout : 4x S-25L
• Su-39 :
  • Drop tank fuel mass : 1600 -> 1300 kg
  • New loadouts:
    • 1x Kopyo-25 + 2x R-60M (stock)
    • 2x R-60M + 4x S-25L
• TB-3 : Cockpit is now considered open when it comes to sounds
• Tornado G.R. Mk. 1 :
  • Loadout changed : 2x PGM 2000 -> 3x PGM 2000
  • Custom loadout changes :
    • Slot 3, 9 changed : Added 1x PGM 2000 option
    • Slot 4 changed :
      • Added 1x PGM 2000 option, can't be equipped together with 1x PGM 2000 on slot 8
      • Removed 1x PGM 2000 option
    • Slot 6 changed :
      • Option changed : 1x 1000 lb, can't be equipped together with 2x 1000 lb on slots 4, 5, 7, 8 or 2x 1000 lb Mk.13 No.117 on slots 4, 5, 7, 8 or 2x 1000 lb on slots 4, 5, 7, 8 or 1x PGM 500 on slots 4, 8 or 1x PGM 2000 on slots 4, 8 or 1x GBU-24/B on slot 8 -> 1x 1000 lb, can't be equipped together with 2x 1000 lb on slots 4, 5, 7, 8 or 2x 1000 lb Mk.13 No.117 on slots 4, 5, 7, 8 or 2x 1000 lb on slots 4, 5, 7, 8 or 1x PGM 500 on slots 4, 8 or 1x PGM 2000 on slot 4 or 1x GBU-24/B on slot 8 or 1x PGM 2000 on slot 8
      • Option changed : 1x 1000 lb Mk.13 No.117, can't be equipped together with 2x 1000 lb on slots 4, 5, 7, 8 or 2x 1000 lb Mk.13 No.117 on slots 4, 5, 7, 8 or 2x 1000 lb on slots 4, 5, 7, 8 or 1x PGM 500 on slots 4, 8 or 1x PGM 2000 on slots 4, 8 or 1x GBU-24/B on slot 8 -> 1x 1000 lb Mk.13 No.117, can't be equipped together with 2x 1000 lb on slots 4, 5, 7, 8 or 2x 1000 lb Mk.13 No.117 on slots 4, 5, 7, 8 or 2x 1000 lb on slots 4, 5, 7, 8 or 1x PGM 500 on slots 4, 8 or 1x PGM 2000 on slot 4 or 1x GBU-24/B on slot 8 or 1x PGM 2000 on slot 8
      • Option changed : 1x 1000 lb, can't be equipped together with 2x 1000 lb on slots 4, 5, 7, 8 or 2x 1000 lb Mk.13 No.117 on slots 4, 5, 7, 8 or 2x 1000 lb on slots 4, 5, 7, 8 or 1x PGM 500 on slots 4, 8 or 1x PGM 2000 on slots 4, 8 or 1x GBU-24/B on slot 8 -> 1x 1000 lb, can't be equipped together with 2x 1000 lb on slots 4, 5, 7, 8 or 2x 1000 lb Mk.13 No.117 on slots 4, 5, 7, 8 or 2x 1000 lb on slots 4, 5, 7, 8 or 1x PGM 500 on slots 4, 8 or 1x PGM 2000 on slot 4 or 1x GBU-24/B on slot 8 or 1x PGM 2000 on slot 8
      • Option changed : 1x MK 13 MOD 0 (Paveway), can't be equipped together with 2x 1000 lb on slots 4, 5, 7, 8 or 2x 1000 lb Mk.13 No.117 on slots 4, 5, 7, 8 or 2x 1000 lb on slots 4, 5, 7, 8 or 1x PGM 500 on slots 4, 8 or 1x PGM 2000 on slots 4, 8 or 1x GBU-24/B on slot 8, must be equipped together with 1x TIALD on slot 4 -> 1x MK 13 MOD 0 (Paveway), can't be equipped together with 2x 1000 lb on slots 4, 5, 7, 8 or 2x 1000 lb Mk.13 No.117 on slots 4, 5, 7, 8 or 2x 1000 lb on slots 4, 5, 7, 8 or 1x PGM 500 on slots 4, 8 or 1x PGM 2000 on slot 4 or 1x GBU-24/B on slot 8 or 1x PGM 2000 on slot 8, must be equipped together with 1x TIALD on slot 4
• BO 105 CB-2, Ka-29, Mi-24P (all), Mi-24V, Mi-28A, Mi-35M, UH-1B, UH-1C : Maximum number of simultaneously guided missiles is now limited to 1
• SA 342 L, Z9 (all), Z11WA : 12.7 mm gunpod : Mass : 130 -> 42.25 kg

Sensor changes :

• AI Mk. 24 Foxhunter (all) : ACM lock range : 9250 -> 18500 m
• AN/APG-66 (all) :
  • Transceiver antenna : Elevation : Angle of half sensitivity : 3.5 -> 4.8°
  • Narrow search pattern :
    • Pitch stabilization limit : 30 -> 60°
    • Period : 0.35 -> 0.65 s
    • Search zone : 5° x 20° -> 8° x 20°
  • Medium search pattern :
    • Elevation limits : -30° / 30° -> -60° / 60°
    • Pitch stabilization limit : 30 -> 60°
    • Period : 2 -> 3.8 s
    • Search zone : 10° x 60° -> 8° x 60°
  • Wide search pattern :
    • Elevation limits : -30° / 30° -> -60° / 60°
    • Pitch stabilization limit : 30 -> 60°
    • Period : 2 -> 3.8 s
    • Search zone : 5° x 120° -> 8° x 120°
  • HUD lock pattern :
    • Elevation limits : -30° / 30° -> -60° / 60°
    • Period : 1.3 -> 1 s
    • Search zone : 20° x 20° -> 19.2° x 20°
  • Vertical lock pattern :
    • Elevation limits : -30° / 30° -> -60° / 60°
    • Period : 1.3 -> 1 s
    • Search zone : 9.9° x 40° -> 9.6° x 40°
  • Acquisition pattern :
    • Elevation limits : -30° / 30° -> -60° / 60°
    • Search zone : 5° x 20° -> 4° x 20°
• AN/AWG-9 (TISEO) : Name : AN/AWG-9 / TISEO -> AN/AWG-9 / AN/AXX-1 TCS
• Kopyo-25 :
  • Ground standby : Name : PD HDN standby -> GTM standby
  • Ground search : Name : TWS HDN search -> GTM search
  • Ground TWS search : Name : TWS HDN search -> TWS GTM search
  • Ground TWS acquisition : Name : TWS HDN acquisition -> TWS GTM acquisition
  • Ground track : Name : PD HDN track -> GTM track
• Thales RDY, Thomson-CSF RDI :
  • PD modes replaced with MPRF and HPRF modes
  • All patterns : Elevation limits : -55° / 55° -> -60° / 60°

Naval changes :

• New vehicle files :
  • Émile Bertin (FR)
  • Marceau (FR)
• AF 99, AF 128, Krischan der Große, KS 5, LS (all), MZ 1, R 41, R 130, R 301, S 38, S 62, S 100 (all), S 204, S 701, SF 05, SF 07, VS 8, VS 10 : Removed 1 skin
• Ise : Engine Max Speed : 47.16 -> 46.8 km/h
• Freccia (P 493) : Loadout changed : 2x S.I. 270 L : Required modification changed : Stock torpedoes -> Torpedo tubes
• Aigle, Vautour : Moved Center of Gravity
• Chacal, Panthere :
  • Radio station, fire control room HP increased
  • Shell and charge ammo storage HP lowered
  • Added Two Fuel Tanks
  • Turret Armor : Antifragmentation armor -> RHA
• Colbert :
  • Horizontal armor above the steering : 30 -> 18 mm
  • Main turret floor : 30 -> 20 mm
  • Rangefinder HP lowered
  • Moment of Inertia : [62, 1500, 930] -> [70, 1710, 1050]
  • Moved Center of Gravity
  • Engine Acceleration Increased
  • Rudder area : 24 -> 30 m
  • Moved Cameras
  • Ammo Outside First Ammo Stage of third and fourth main turrets : Reload Time Multiplier : 1.5 -> 1.2
• Duguay-Trouin, Primauguet : Moved Camera
• Jeanne d'Arc :
  • Removed Free Respawn
  • Moved Center of Gravity
  • Engine Acceleration to 16.2 km/h lowered
• Leopard :
  • Secondary Guns can no longer be fired together with primary cannons
  • Moved Center of Gravity
  • Engine Max Speed : 65.736 -> 58.32 km/h
  • Armor Reworked
  • Added two 20 mm cannons
  • Removed two 40 mm, four 12.7 mm, four 13.2 mm cannons
  • Depth charges : WBG -> Mk. VII
  • Added ammo storage data
• Lorraine :
  • Now rearms in batches
  • First part of angled belt armor in the nose removed
  • Angled belt armor : Thickness : 70 -> 42 mm
  • Moved Center of Gravity
  • Engine Max Speed : 39.636 -> 38.124 km/h
  • Engine Acceleration lowered
  • Rudder area : 28 -> 38
  • Moved Cameras
  • Detection Height : 53.4 -> 42.4 m
  • Breaches :
    • Water Mass Multiplier : 280 -> 160
    • Additional Water Should Die Percent : 26 -> 21 %
    • Side Center Of Mass Offset Percent : 12 -> 10 %
• Milan :
  • Moved Center of Gravity
  • Added 6x 13.2 mm/76 Mle. 1929 Hotchkiss machine gun
• Paris :
  • Armor Reworked
  • Moved Center of Gravity
  • Engine Acceleration lowered
  • Rudder area : 28 -> 38
  • Moved Cameras

Ground vehicle changes :

• M4 (T26) : Added 8 Shell (in the ammo storage, it had less than the gun could use)
• T1E1 : Hull machine gun : Horizontal Limits : +/- 0 -> +/- 15°
• SPz 12-3 (Typ 3Z 8DLA) "Raketenautomat" :
  • Added servo turret turn sound
  • No longer has a magazine reload
  • Added Replenishment Delay = 4 s
  • Added Replenishment Time = 15 s
• BTR-80A :
  • Hull Top : 8 -> 6 mm
  • Gunner Hatch : 8 -> 19 mm
  • Turret : 13 -> 23 mm
  • Hull Top Hatches : 8 -> 6 mm
  • Engine Grille : 5 mm Structural steel -> 6 mm RHA
  • Water Shield : 13 mm RHAHH -> 5 mm Structural steel
  • Turret roof : 13 -> 23
  • Added small plate just under Gunner's Hatch to DM as 23 mm RHAHH
  • Engine Sound : MCTA V6 -> BTR80
  • Turret Turn Sound : Servo -> Manual
  • Added NVD projector
• Vickers Battle Tank Mk. 1 : Added Gun Mask to DM as 50 mm CHA
• Vijayanta :
  • Added Gun Mask to DM as 50 mm CHA
  • Added 4 Skins
• VBCI 2 (MCT-30) :
  • Almost all aluminium armor had their HP increased from 1000 to 10000
  • 1 Front plate inside the hull front : 45 -> 35 mm
  • Lower Hull Sides : 20 -> 35 mm
  • Inner Rear hull : 15 -> 35 mm
  • Plate above tracks : 15 -> 35 mm
  • Crew compartment floor : 15 -> 35 mm
  • Rear Door : 50 -> 35 mm
  • Turret : 40 -> 30 mm
  • Hull roof : 25 -> 35 mm
  • Front Hull Corners : 50 mm Aluminium alloy AMS 4050A -> 12 mm RHAHH
  • Hull floor : 25 -> 35 mm
  • Armor around the Gun Breech : 25 -> 30 mm
  • Second layer of Upper Hull Sides : 25 -> 35 mm
  • Gun Mantlet : 25 mm Aluminium alloy AMS 4050A -> 10 mm RHAHH
  • First layer of upper Hull Side : 25 mm Aluminium alloy AMS 4050A -> 12 mm RHAHH
  • Armor plate inside turret : 10 -> 30 mm
  • Armor in the middle of the turret ring : 25 -> 30 mm
  • Driver hatch : 25 -> 35 mm
  • Inner Part of the hull rear : 25 -> 35 mm
  • Inner Part of the rear door : 50 -> 35 mm
  • Small armors on the UFP : 25 -> 35 mm
  • Lower LFP : 25 -> 35 mm
  • Add-on UFP armor : 25 mm Aluminium alloy AMS 4050A -> 5 mm RHA
  • Plate around rear Door : 25 mm Aluminium alloy AMS 4050A -> 12 mm RHAHH
  • Boxes next to turret : 25 -> 35 mm
  • Boxes on the front of hull : 25 mm Aluminium alloy AMS 4050A -> 5 mm Structural steel
  • UFP : 5 mm Aluminium alloy AMS 4050A -> 12 mm RHAHH
  • Front Hatches : 5 mm Aluminium alloy AMS 4050A -> 12 mm RHAHH
  • LFP : 25 mm Aluminium alloy AMS 4050A -> 12 mm RHAHH
  • Little Armor Box between wheels : 25 -> 35 mm
  • Part of the door : 25 mm Aluminium alloy AMS 4050A -> 12 mm RHAHH
  • 1 front plate : 25 mm Aluminium alloy AMS 4050A -> 12 mm RHAHH
  • Engine Grilles : 25 -> 35 mm
  • Armor behind wheels : 25 mm Aluminium alloy AMS 4050A -> 12 mm RHAHH
  • 12.7 mm Support : 25 -> 20 mm
  • Gun Mask: 65 mm Aluminium alloy AMS 4050A -> 10 mm RHAHH
  • Turret sides: 42 mm Aluminium alloy AMS 4050A -> 10 mm RHAHH
  • Turret back : 25 mm Aluminium alloy AMS 4050A -> 10 mm RHAHH
  • Turret Roof : 25 mm Aluminium alloy AMS 4050A -> 10 mm RHAHH
  • Front of turret : 25 mm Aluminium alloy AMS 4050A -> 10 mm RHAHH
  • Rear of turret upper plate : 25 mm Aluminium alloy AMS 4050A -> 10 mm RHAHH
  • Bottom of turret : 20 -> 30 mm
  • Part of turret ring : 25 -> 35 mm
  • Turret rear corners : 25 mm Aluminium alloy AMS 4050A -> 10 mm RHAHH
  • Turret roof hatches: 25 -> 30 mm
  • Plates next to gun : 25 -> 30 mm
  • Turret front corners : 25 mm Aluminium alloy AMS 4050A -> 10 mm RHAHH
  • Sight Support : 25 -> 30 mm
  • Part of turret ring : 5 mm Structural steel -> 30 mm Aluminium alloy AMS 4050A
  • Gun support : 5 mm Structural steel -> 30 mm Aluminium alloy AMS 4050A
  • Gun barrels :
    • HP : 200 -> 100
    • 35 -> 10 mm
  • Added plates between turret crew and driver compartment to DM as 10 mm Aluminium alloy AMS 4050A
  • Added plates between the engine and turret crew, and in front of the driver to DM as 5 mm Aluminium alloy AMS 4050A, visible in X-Ray
  • Added plate between 1st and 2nd wheels on the right side to DM as 12 mm RHAHH
  • Added Driver periscope to DM as 5 mm Structural steel
  • Removed 4 plate of 25 mm, 3 plate of 30 mm and 1 plate of 65 mm Aluminium alloy AMS 4050A, 5 plate of 5 mm Structural steel, 4 optics
  • Cannon breech, horizontal turret drive, transmission and ammo can no longer be overpressured
  • 30 mm Bushmaster 2 Mk. 44 cannon :
    • Horizontal Speed : 30 -> 60 °/s
    • Vertical Speed : 8 -> 60 °/s
    • Vertical Limit : [-8, 20] -> [-10, 45]°
    • Added 2 Plane Stabilizer (mfw first french IFV and first french Stabilized vehicle is a premium ))))
  • 12.7 mm M2 HB : Sight can now use NVD
  • Added Commander Sight (Also Stabilized)
  • Second and fourth set of wheels now have 10° steering
  • Zoom : 10 -> [2, 14.74]
  • FoV : 3.9 -> 17°
  • Added Target Tracker
  • Gunner Thermal :
    • 500x300 -> 1200x800
    • Noise Factor : 0.05 -> 0.04
  • Added Commander Thermal :
    • 1200x800
    • Noise Factor = 0.04
  • Driver NVD :
    • 800x600 -> 1200x800
    • Light Multiplier : 5 -> 7
  • Added Ammo Storage data
• Sherman Mk. IVb (M3) : Added a First Ammo Stage of 23 shells (Reload x 1.33 beyond)
• Magach 6 Bet Gal : Added Delay between Smoke Salvo = 0.5 s

Current Dev version : 2.26.0.40
Current Dev-Stable version : 2.25.1.135
Current Live version : 2.25.1.135

extremely new to reddit. sorry. just really need a place to talk. this will probably be long.
10 years ago i lost my dad to stomach cancer. they found it very late so he died very quickly after being diagnosed. he chose hospice so i was there every part of the way to watch him die. i was 13 and it really messed me up. i still have unresolved trauma from it.
since then, i have suffered from very persistent and extreme depression and anxiety, and some ptsd. it obviously impacted my formative teenage years intensely negatively. i struggled with serious suicidal thoughts all through high school. since graduating in 2017, it slowly got less severe, but depending on life events could easily come back full force.
for the better part of this past decade i attempted to receive help through therapy, psychiatry, and many, many prescription medications. i have throughly exhausted these tools that i was lucky enough to receive thanks to my caring mother. however, it was never enough. i do not feel that with this help there was ever any noteworthy improvement. i have not been to therapy for over a year and i have not taken any medication for two. i do not intend to seek further help in either form.
the reason i have come here to talk now though is not because of any of this. about two months ago now, my mother died of cancer too. it wasn’t like my father’s. it was a much more torturous and cruel experience for my family and i in how slow and debilitating it was. she was first diagnosed with liposarcoma a few years ago. it’s a very rare form of cancer in which there is very little to do in way of treatment. she underwent a successful surgery to remove a huge tumor. the nurses and doctor admitted it was a miracle she survived. she was cancer free for a couple years, but another tumor formed. she needed surgery again, but she suffered a lot more from the ordeal this time. they removed a kidney and some muscle. she was much weaker afterwards. but still she fought to be healthier, so it wouldn’t come back. less than a year later, it came back anyway. too big a tumor for surgery in her current physical state. she was forced to choose between chemotherapy to attempt to shrink the tumor, or live like normal as long as she could until it killed her. she chose to take a chance with chemo. it ruined her. she couldn’t complete the full treatment plan. it wasn’t even working in the first place. she couldn’t undergo surgery. all that was left was for her to die. and just like my father i watched her rot. i watched as her body and mind failed her. an impossibly cruel fate for someone so beautiful and kind and loving. she deserved a much better life than what she got. and that is putting it egregiously lightly.
because of my mental state i made my mother suffer through my youth. i’m the youngest of four children so she already worried about me the most. i amplified her anxiety tenfold. at times i was cruel to her due to my struggles with anger management. i am not satisfied with my relationship with my mother. i always wanted to be much, much better for her. but the reality is that i’m not. i tried to step up past my limits for her during her final months, but i’m kidding myself if i thought even for a moment it could make up for the years of pain and disrespect i inflicted upon her. i always have and always will hate myself for it.
i was not ready to lose my mother, and i mean that in multiple ways. due to my extensive depression i spent almost all my days up until maybe 2021 doing absolutely nothing but finding distractions from reality. my life was consumed by pastimes like video games and anime. because of this, i have few life skills. my mother had immeasurable knowledge and talent. yet i never took the time to learn anything from her. i relied on her for much, much more than i ever realized. i moved out almost a year ago to rent a place with a couple of my very good friends. i work a minimum wage job because i dropped out of community college after 2 years. i can barely take care of myself. i make only enough money for rent and utilities. i can’t afford food. thus far my mom was helping me pay for extra things and if i’m lucky my roommates will buy me food but now that she’s dead i’m totally on my own with supporting myself and it’s just starting to hit me when i paid my credit card bill and have next to nothing left.
i have a very wonderful boyfriend. we’ve been dating for 2 years. he is genuinely perfect and has changed my life. up to this point we have shared the kind of love you think is fake or only exists in books and movies. i thought i would be able to survive my mother’s passing with his support. for a time i did. we are long distance but he came to visit right after she died. he stayed with me for more than a month and even though my loss was painful i still thought things would be okay because i want to share a future with him. however, since he left and since i’ve returned to work, i have felt my mental state rapidly decline. it is to the point i fear i’m straining our relationship. he is desperately trying to help, but his words don’t seem to comfort me anymore.
i cry every night now. even on nights where i’m too hopeless or numb to cry, i cry in my dreams. i have never, ever been at this low a point in my life. not even losing my father left me like this. my friends have all been laughably removed from my suffering. my two roommates who i considered my closest friends are so far removed from this that neither of them even spared a typical “sorry for your loss” when she died. it disgusts me. everyone in my friend group either has never lost a loved one, or has such a terrible relationship with their parent(s) that they couldn’t even imagine what it feels like to love a parent, let alone lose one. which means the lack of empathy is utterly horrendous and intolerable. even sympathy can be too much to ask from these people on this topic.
all of that is to say i am isolated in my own purgatory. i feel nothing anymore but anger and disgust. hobbies and pastimes i used to enjoy that would have helped me in the past mean nothing to me anymore. my suffering is amplified by the fact that i have been mildly lashing out at my boyfriend, the one person in my life right now who has been actively listening to me and caring for me through the entire unfiltered experience of watching my mother die. i reward his patience and positivity with contempt or blatant disregard in favor of misery. at times i am angry with him simply because i see him as an obstacle preventing me from killing myself. because if he wasn’t in my life, i 100% would be dead right now. and every day that i survive amplifies my desire for suicide just a bit more. i don’t know how long this will go on. it’s starting to affect my memory, because i feel like i can’t even remember the things about my boyfriend that make me happy. when i try to remember anything specific about us i can’t focus on it. nothing is there. i can’t remove myself from this numbness and it infuriates me. i don’t want to self sabotage this relationship but i’m afraid i can’t stop it from happening.
i guess a tldr would be hey i have watched both of my parents die from cancer and it has given me insurmountable trauma, i truly lack emotion now but i struggle with killing myself cuz there is a small sense of self that still worries about my godsend boyfriend. i just don’t know what i want from life anymore

Hi There!
So recently, I have been using ChatGPT for writing bash Scripts for my system.
So I just wanted to share what It has been able to provide and maybe hear your thoughts. It has been a pretty amazing tool in my Linux journey
​
This Script that I was writing to install some dependencies on my system that were needed to compile a program

# Check distribution and perform package installation accordingly if [[ -f /etc/os-release ]]; then source /etc/os-release if [[ $ID == "debian" $ID == "ubuntu" $ID_LIKE == *"debian"* ]]; then # Debian/Ubuntu and Debian-based distributions package_manager="apt" packages=("libssl-dev" "libmagic-dev") # Check if the packages are installed if ! dpkg -s "${packages[@]}" >/dev/null 2>&1; then echo "Packages ${packages[*]} are not installed. Installing..." # Install the packages sudo "$package_manager" install -y "${packages[@]}" else echo "Packages ${packages[*]} are already installed." fi elif [[ $ID == "fedora" $ID_LIKE == *"fedora"* ]]; then # Fedora and Fedora-based distributions package_manager="dnf" packages=("openssl-devel" "file-devel") # Check if the packages are installed if ! rpm -q "${packages[@]}" >/dev/null 2>&1; then echo "Packages ${packages[*]} are not installed. Installing..." # Install the packages sudo "$package_manager" install -y "${packages[@]}" else echo "Packages ${packages[*]} are already installed." fi elif [[ $ID == "arch" $ID_LIKE == *"archlinux"* ]]; then # Arch-based distributions package_manager="pacman" packages=("openssl" "file") # Check if the packages are installed if ! "$package_manager" -Qs "${packages[@]}" >/dev/null 2>&1; then echo "Packages ${packages[*]} are not installed. Installing..." # Install the packages sudo "$package_manager" -S --noconfirm "${packages[@]}" else echo "Packages ${packages[*]} are already installed." fi else echo "Unsupported distribution. Exiting..." exit 1 fi else echo "Unable to determine distribution. Exiting..." exit 1 fi 

This is just a part of the script. Initially this code block was quite small, but after tinkering around with it, also making is arch/fedora/debian compatible, Fixing a few bugs, taking into account suggesting from Shellcheck the script grew quite large.
What do you guys think of this code that GPT wrote, It looks pretty good to me.
Don't worry, I don't run any code that GPT provides without understanding what it does, And I understand most of what this script is doing, atleast I think I do.
Also this is a old version, In the new one I did remove all the `sudo` command from the script and now the whole script needs to run as sudo
What do you guys think about this? Let me know if something looks wrong or something I should do differently Have Fun!

Please stay on topic: this post is only for comments discussing the uncertainties, shortcomings, and concerns some may have about Monero.
NOT the positive aspects of it.
Discussion can relate to the technology itself or economics.
Talk about community and price is not wanted, but some discussion about it maybe allowed if it relates well.
Be as respectful and nice as possible. This discussion has potential to be more emotionally charged as it may bring up issues that are extremely upsetting: many people are not only financially but emotionally invested in the ideas and tools around Monero.
It's better to keep it calm then to stir the pot, so don't talk down to people, insult them for spelling/grammar, personal insults, etc. This should only be calm rational discussion about the technical and economic aspects of Monero.
"Do unto others 20% better than you'd expect them to do unto you to correct subjective error." - Linus Pauling
How it works:
Post your concerns about Monero in reply to this main post.
If you can address these concerns, or add further details to them - reply to that comment. This will make it easily sortable
Upvote the comments that are the most valid criticisms of it that have few or no real honest solutions/answers to them.
The comment that mentions the biggest problems of Monero should have the most karma.
As a community, as developers, we need to know about them. Even if they make us feel bad, we got to upvote them.
https://youtu.be/vKA4w2O61Xo
To learn more about the idea behind Monero Skepticism Sunday, check out the first post about it:
https://np.reddit.com/Monero/comments/75w7wt/can_we_make_skepticism_sunday_a_part_of_the/