Left external iliac lymph node
Swollen lymph nodes since vaccine
2023.03.22 07:14 sleeplessbearr Swollen lymph nodes since vaccine
Any remedies? Pretty sure I've had this along with a but loud of other symptoms
submitted by sleeplessbearr to vaccinelonghauler [link] [comments]
2023.03.22 07:10 sapphireminds Baby A (twins, A and B)
Information taken from https://tattle.life/wiki/lucy_letby_case_2/
Accused method of injury: air embolus
GA at birth 30 weeks, from what I can tell
Unit is noted to be busy with other twins and CPAPing babies
They attempted to place UVC x 2, with malposition (it doesn't mention what, but usually it means that it is in the liver or splenic vein) They left the 2nd UVC attempt in place, but they did not mention that it was pulled to low-lying.
This air was only seen post mortem though, which is more suspicious, just because a lot of stuff is done post mortem and the body starts to produce gas fairly quickly. Xrays from immediately after the code started showed no signs of air in unusual places.
I will also say, that while they are saying that LL was actively injecting air into the baby, there were other people nearby, which seems unusual to me, especially considering this is supposed to be her first "attack". Several of the cases make it pretty ballsy that she was basically attempting to murder babies while other people were watching.
As I have said before, I feel like they have tried to find anything they could conceivably try and pin on her, in order to make the insulin charges stick, because they do not have enough evidence for those, because of medical mismanagement by the doctors.
Of course, anyone is free to agree/disagree with my interpretation of events. :)
Overall, I don't think either side did a great job. Myer's is trying to open doubt wherever he can, but I feel like he doesn't have enough medical knowledge/guidance and is doing it too scattershot and not as logically as he could.
I have a lot of reservations about Dr. Evans, who is incredibly confident of his ideas and continually states there's no other possible explanations, even when there are. Plus he's not a neonatal expert. Just because he set up NICUs in the 70s and 80s does not mean he's a neo expert. He apparently solicited the police to look into these deaths, so I just have a lot of reservations about his "independent" status.
If you think I've missed something important, or have a disagreement, please bring it up!
submitted by sapphireminds to LLtrial [link] [comments]
Accused method of injury: air embolus
GA at birth 30 weeks, from what I can tell
Unit is noted to be busy with other twins and CPAPing babies
They attempted to place UVC x 2, with malposition (it doesn't mention what, but usually it means that it is in the liver or splenic vein) They left the 2nd UVC attempt in place, but they did not mention that it was pulled to low-lying.
- As background, you can place a UVC as normal or low-lying. Normal position is with the tip of the catheter above the diaphragm and is the preferred position for UVC. Low lying UVCs can be used in emergency situations, or if no other access can be obtained. Their correct position is just barely inserted into the umbilical cord, just until you get blood back, and then you need to get xrays to ensure it has not entered the liver. Any UVC in the liver needs to be immediately removed. It is never acceptable to ever infuse into the liver. (tldr: it needs to be above or below the liver, but never in the liver)
- This is an IV that is inserted in the skin like normal, but instead of a short plastic piece that remains in the body, it's a long piece and is fed through the veins to sit outside the heart
- There's a line of questioning about the fact that the child was urinating was "proof" that they didn't need fluids, but that's not true, as babies are born with extra water on board and need to pee that off, but they still need to be given fluids in the meanwhile - I'm not sure it is significant at all, but just to note the logic in the discussion was off
His clinical notes, written in retrospect at 9.30pm, record for 5pm: "UVC in situ on my arrival on NICU at 5pm. No definitive access at this point, so I've left in situ with plan to remove if long line sited or pull back to low position is long line not successful."This is from the doctor who placed the lines, so he intentionally left a line, in the liver.
- This is not acceptable practice. If you need to leave the line for emergency access, you pull it back to low-lying immediately, you do not leave it in the liver, because there is a risk it could be used accidentally. If you administer fluids into the liver it can cause damage to the liver itself or cause bleeding/clots or other issues. I will emphasize again, it's never ok to leave a UVC in the liver. Pull it to low lying or remove it entirely, do not leave it in a dangerous position.
He said: "That was my immediate thought. In hindsight...there was no possible link [between its insertion and the collapse]."
- Pulling the PICC was probably the right call. It is not true that there is no possible link, there's lots of possible links, but we don't have anything definitive.
- This is the normal way it happens in a NICU. Sats drop, then the HR. Almost all codes in NICU are respiratory based
- One suspicious thing is that the baby continued to decompensate after intubation. Often, that is a sign that the intubation was not done correctly and the breathing tube is in the esophagus, not the trachea.
- This is significant because if a PICC is too deep and enters the heart, it can "tickle" the SA node, which is what controls heart rhythm. I have quite literally induced arrhythmias before accidentally by PICC/UVC. If you start getting a weird rhythm, you just immediately pull the line back. And if you have inserted a line and there's a weird rhythm and it's deep, it could absolutely be that. It would not show any "damage" or anything else on post mortems.
He comments "unusual findings" in gas and air found in the baby boy, including "a line of gas just in front of the spine".They have not mentioned whether the PICC was in an upper extremity or lower. This could be important. A line of gas by the spine would be concerning for air in the line, though the first assumption would be that it was from insertion of the line.
This air was only seen post mortem though, which is more suspicious, just because a lot of stuff is done post mortem and the body starts to produce gas fairly quickly. Xrays from immediately after the code started showed no signs of air in unusual places.
- IMO, if there was an air embolism, it would have shown up then, not just post mortem.
- BTW, this is not how emboli are diagnosed. Lots of NICU babies who die don't have "clear" causes of death beyond prematurity.
I will also say, that while they are saying that LL was actively injecting air into the baby, there were other people nearby, which seems unusual to me, especially considering this is supposed to be her first "attack". Several of the cases make it pretty ballsy that she was basically attempting to murder babies while other people were watching.
As I have said before, I feel like they have tried to find anything they could conceivably try and pin on her, in order to make the insulin charges stick, because they do not have enough evidence for those, because of medical mismanagement by the doctors.
Of course, anyone is free to agree/disagree with my interpretation of events. :)
Overall, I don't think either side did a great job. Myer's is trying to open doubt wherever he can, but I feel like he doesn't have enough medical knowledge/guidance and is doing it too scattershot and not as logically as he could.
I have a lot of reservations about Dr. Evans, who is incredibly confident of his ideas and continually states there's no other possible explanations, even when there are. Plus he's not a neonatal expert. Just because he set up NICUs in the 70s and 80s does not mean he's a neo expert. He apparently solicited the police to look into these deaths, so I just have a lot of reservations about his "independent" status.
If you think I've missed something important, or have a disagreement, please bring it up!
2023.03.22 07:08 Harjjo (3.5) Help with context steering equation
 | I've got a context steering script but I'm not really understanding how to shape the weights. Insight would be appreciated. submitted by Harjjo to godot [link] [comments] extends Node var obstacle = preload("res://scenes/TESTEObstacle.tscn") export var num_rays = 16 export var look_ahead = 100 onready var node = $Node2D var interest = [] var danger = [] var rays = [] var lines = [] var target = Vector2.ZERO var dir_line = Line2D.new() func _unhandled_input(event): if event is InputEventMouseButton: if event.button_index == BUTTON_LEFT and event.pressed: var o = obstacle.instance() add_child(o) o.global_position = node.get_global_mouse_position() func _ready(): interest.resize(num_rays) danger.resize(num_rays) for i in num_rays: var _ray = RayCast2D.new() node.add_child(_ray) rays.append(_ray) _ray.enabled = true var angle = i * 2 * PI / num_rays _ray.cast_to = (Vector2.RIGHT * look_ahead).rotated(angle) var _line = Line2D.new() node.add_child(_line) lines.append(_line) _line.add_point(Vector2.ZERO, 0) _line.add_point((Vector2.RIGHT * look_ahead).rotated(angle), 1) _line.width = 2 node.add_child(dir_line) dir_line.add_point(Vector2.ZERO, 0) dir_line.add_point(Vector2.ZERO, 1) dir_line.default_color = "fdff00" dir_line.width = 2 func _physics_process(delta): target = $Mouse.global_position _set_interest() _set_danger() _choose_dir() func _set_interest(): for i in num_rays: var d = rays[i].cast_to.normalized().dot((target - node.global_position).normalized()) interest[i] = max(0, d) func _set_danger(): for i in num_rays: if rays[i].is_colliding(): var d = rays[i].cast_to.normalized().dot((rays[i].get_collision_point() - node.global_position).normalized()) danger[i] = d else: danger[i] = 0.0 interest[i] = max(0, interest[i] - danger[i]) func _choose_dir(): var chosen_dir = Vector2.ZERO for i in num_rays: chosen_dir += rays[i].cast_to * interest[i] if interest[i] > danger[i]: lines[i].set_point_position(1, rays[i].cast_to * Vector2(interest[i], interest[i])) lines[i].modulate = "ffffff" else: lines[i].set_point_position(1, rays[i].cast_to * Vector2(danger[i], danger[i])) lines[i].modulate = "ff0000" chosen_dir = chosen_dir.normalized() dir_line.set_point_position(1, (Vector2.RIGHT * look_ahead).rotated(chosen_dir.angle())) which gives me this shape: https://preview.redd.it/zy4ckbkae8pa1.png?width=271&format=png&auto=webp&s=91a53838e7c634161a49a126daec3bed2859fa07 which is normal I believe, it makes sense it would be weighted that way. https://preview.redd.it/necdp6qoe8pa1.png?width=374&format=png&auto=webp&s=5f8f34ba401706920b827be4ed8288d8a26a1dbe But how would i make it so that it would instead be weighted like this shape? https://preview.redd.it/5efgct81f8pa1.png?width=445&format=png&auto=webp&s=dfcdedcedc3dbeeaf2670e2a3a8b5ade4b49ebb9 or even this shape? (the target is the mouse, the red circles are obstacles) |
2023.03.22 07:02 No_Range_3720 Swollen lymph nodes in neck that are painless...
Early16, male, normal BMI and such. A month ago I had a CECT scan of whole abdomen, where it showed that I had some enlarged lymph nodes in the mesenteric region. The report said it showed features of non specific mesenteric lymphadenitis. Fast forward to today, I can feel a soft movable lymph node below my jaw in cervical region that is painless to touch. I do feel my chest to be tight accompanied by difficulty z, and fatigued but only when I feel anxious and think about this whole condition. Other time I am completely normal. Not experiencing anyother symptoms. What could this mean?
submitted by No_Range_3720 to AskDocs [link] [comments]
2023.03.22 06:39 pardeepchopra Alternative Treatment For Sarcoidosis In Planet Ayurveda
 | Sarcoidosis is a kind of inflammatory disease that affects multiple organs in the body. It is a condition with the growth of inflammatory cells in different parts of body organs. Most commonly Sarcoidosis occurs in the lungs, skin, eyes, and lymph nodes. In people with Sarcoidosis, nodules or abnormal masses called granulomas may alter the normal structure and functions of the affected organ. Granuloma consists of inflamed tissues. Planet Ayurveda provides the best treatment for Sarcoidosis disease. We manufacture natural and herbal products with strict adherence to ancient Ayurveda. And we provide the best products like Capsules, Herbal Powders, Herbal Teas, Herbal Tablets, Herbal Oils, Herbal Juices, Beauty and Cosmetic products, etc. For more information visit our website. submitted by pardeepchopra to u/pardeepchopra [link] [comments] Name: Planet Ayurveda Address: Plot No. 627, Sector 82, JLPL Industrial Area, Punjab 160055 Phone Number: 9915593604/ 0172 521 4030 Email Id: [[email protected]](mailto:[email protected]) https://preview.redd.it/bhvfhghu98pa1.jpg?width=323&format=pjpg&auto=webp&s=4f2bed80844928e6ee28e87dcc27760976f0cf52 |
2023.03.22 06:23 elastiks Subversive discovery: Can lymph nodes promote the success of cancer immunotherapy?
 | submitted by elastiks to medical_trend [link] [comments] |
2023.03.22 06:20 code_hunter_cc Minikube service URL not working
Kubernetes
I'm new to Kubernetes and I'm learning. I have my Windows 8 machine where I installed Vagrant. Using vagrant I'm running ubuntu VM and inside that VM I'm running 3 docker containers.
Vagrant file:
Vagrant.configure(2) do config config.vm.box = "test" config.vm.network "public\_network" config.vm.network "forwarded\_port", guest: 8080, host: 8080 config.vm.network "forwarded\_port", guest: 50000, host: 50000 config.vm.network "forwarded\_port", guest: 8081, host: 8089 config.vm.network "forwarded\_port", guest: 9000, host: 9000 config.vm.network "forwarded\_port", guest: 3306, host: 3306 config.vm.provider "virtualbox" do v v.memory = 2048 v.cpus = 2 end config.vm.provider "virtualbox" do v v.customize ["modifyvm", :id, "--natdnshostresolver1", "on"] v.customize ["modifyvm", :id, "--natdnsproxy1", "on"]endend Container in Ubuntu VM :
[email protected]:~/docker-containers# docker imagesREPOSITORY TAG IMAGE ID CREATED SIZEdockercontainers\_jenkins latest bb1142706601 4 days ago 1.03GBdockercontainers\_sonar latest 3f021a73750c 4 days ago 1.61GBdockercontainers\_nexus latest ddc31d7ad052 4 days ago 1.06GBjenkins/jenkins lts 279f21046a63 4 days ago 813MBopenjdk 8 7c57090325cc 5 weeks ago 737MB In same VM now I installed minikube and kubectl as mentioned in this link
minikube version:
minikube version: v0.24.1 kubectl version:
Client Version: version.Info{Major:"1", Minor:"9", GitVersion:"v1.9.1", GitCommit:"3a1c9449a956b6026f075fa3134ff92f7d55f812", GitTreeState:"clean", BuildDate:"2018-01-04T11:52:23Z", GoVersion:"go1.9.2", Compiler:"gc", Platform:"linux/amd64"}Server Version: version.Info{Major:"1", Minor:"8", GitVersion:"v1.8.0", GitCommit:"0b9efaeb34a2fc51ff8e4d34ad9bc6375459c4a4", GitTreeState:"clean", BuildDate:"2017-11-29T22:43:34Z", GoVersion:"go1.9.1", Compiler:"gc", Platform:"linux/amd64"} Minikube successfully started in my ubuntu VM. I have created pod.yml file.
apiVersion: v1kind: Podmetadata: name: testsonaralm labels: app: sonar\_almspec: containers: - name: alm-sonar image: dockercontainers\_sonar:latest imagePullPolicy: IfNotPresent ports: - containerPort: 9000 Using this yml file, I created a pod in minikube
[email protected]:~/docker-containers# kubectl create -f test\_pod.ymlpod "testsonaralm" created Now I created a service using kubectl command.
[email protected]:~/docker-containers# kubectl expose pod testsonaralm --port=9000 --target-port=9000 --name almsonarservice "almsonar" [email protected]:~/docker-containers# kubectl get serviceNAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGEalmsonar ClusterIP 10.102.86.193 9000/TCP 10skubernetes ClusterIP 10.96.0.1 443/TCP 3d When I tried to access the URL from my Host machine, I'm getting "Network Error".
[email protected]:~/docker-containers# kubectl describe svc almsonarName: almsonarNamespace: defaultLabels: app=sonar\_almAnnotations:Selector: app=sonar\_almType: ClusterIPIP: 10.101.237.223Port: 9000/TCPTargetPort: 9000/TCPEndpoints: 172.17.0.1:9000Session Affinity: NoneEvents: [email protected]:~/docker-containers# minikube ip127.0.0.1 When I execute the minikube service almsonar --url command, I get an Empty response. So I deleted the service and created a new service with modified command.
[email protected]:~/docker-containers# kubectl expose pod testsonaralm --type=NodePort --name almsonarservice "almsonar" exposed Now when I run minikube service almsonar --url command,I got an URL as
[email protected]:~/docker-containers# minikube service almsonar --urlhttp://127.0.0.1:[email protected]:~/docker-containers# kubectl describe svc almsonarName: almsonarNamespace: defaultLabels: app=sonar\_almAnnotations:Selector: app=sonar\_almType: NodePortIP: 10.101.192.1Port: 9000/TCPTargetPort: 9000/TCPNodePort: 30600/TCPEndpoints: 172.17.0.1:9000Session Affinity: NoneExternal Traffic Policy: ClusterEvents: [email protected]:~/docker-containers# minikube ip127.0.0.1 I'm unable to access this URL in my Ubuntu VM,
[email protected]:~/docker-containers# curl http://127.0.0.1:31209Redirection
Answer link : https://codehunter.cc/a/kubernetes/minikube-service-url-not-working
submitted by code_hunter_cc to codehunter [link] [comments]
I'm new to Kubernetes and I'm learning. I have my Windows 8 machine where I installed Vagrant. Using vagrant I'm running ubuntu VM and inside that VM I'm running 3 docker containers.
Vagrant file:
Vagrant.configure(2) do config config.vm.box = "test" config.vm.network "public\_network" config.vm.network "forwarded\_port", guest: 8080, host: 8080 config.vm.network "forwarded\_port", guest: 50000, host: 50000 config.vm.network "forwarded\_port", guest: 8081, host: 8089 config.vm.network "forwarded\_port", guest: 9000, host: 9000 config.vm.network "forwarded\_port", guest: 3306, host: 3306 config.vm.provider "virtualbox" do v v.memory = 2048 v.cpus = 2 end config.vm.provider "virtualbox" do v v.customize ["modifyvm", :id, "--natdnshostresolver1", "on"] v.customize ["modifyvm", :id, "--natdnsproxy1", "on"]endend Container in Ubuntu VM :
[email protected]:~/docker-containers# docker imagesREPOSITORY TAG IMAGE ID CREATED SIZEdockercontainers\_jenkins latest bb1142706601 4 days ago 1.03GBdockercontainers\_sonar latest 3f021a73750c 4 days ago 1.61GBdockercontainers\_nexus latest ddc31d7ad052 4 days ago 1.06GBjenkins/jenkins lts 279f21046a63 4 days ago 813MBopenjdk 8 7c57090325cc 5 weeks ago 737MB In same VM now I installed minikube and kubectl as mentioned in this link
minikube version:
minikube version: v0.24.1 kubectl version:
Client Version: version.Info{Major:"1", Minor:"9", GitVersion:"v1.9.1", GitCommit:"3a1c9449a956b6026f075fa3134ff92f7d55f812", GitTreeState:"clean", BuildDate:"2018-01-04T11:52:23Z", GoVersion:"go1.9.2", Compiler:"gc", Platform:"linux/amd64"}Server Version: version.Info{Major:"1", Minor:"8", GitVersion:"v1.8.0", GitCommit:"0b9efaeb34a2fc51ff8e4d34ad9bc6375459c4a4", GitTreeState:"clean", BuildDate:"2017-11-29T22:43:34Z", GoVersion:"go1.9.1", Compiler:"gc", Platform:"linux/amd64"} Minikube successfully started in my ubuntu VM. I have created pod.yml file.
apiVersion: v1kind: Podmetadata: name: testsonaralm labels: app: sonar\_almspec: containers: - name: alm-sonar image: dockercontainers\_sonar:latest imagePullPolicy: IfNotPresent ports: - containerPort: 9000 Using this yml file, I created a pod in minikube
[email protected]:~/docker-containers# kubectl create -f test\_pod.ymlpod "testsonaralm" created Now I created a service using kubectl command.
[email protected]:~/docker-containers# kubectl expose pod testsonaralm --port=9000 --target-port=9000 --name almsonarservice "almsonar" [email protected]:~/docker-containers# kubectl get serviceNAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGEalmsonar ClusterIP 10.102.86.193
[email protected]:~/docker-containers# kubectl describe svc almsonarName: almsonarNamespace: defaultLabels: app=sonar\_almAnnotations:
[email protected]:~/docker-containers# kubectl expose pod testsonaralm --type=NodePort --name almsonarservice "almsonar" exposed Now when I run minikube service almsonar --url command,I got an URL as
[email protected]:~/docker-containers# minikube service almsonar --urlhttp://127.0.0.1:[email protected]:~/docker-containers# kubectl describe svc almsonarName: almsonarNamespace: defaultLabels: app=sonar\_almAnnotations:
[email protected]:~/docker-containers# curl http://127.0.0.1:31209
Redirect
When I read the Kubernetes document, the minikube service URL will have a vaild IP. But in my case URL contains localhost IP address.Answer link : https://codehunter.cc/a/kubernetes/minikube-service-url-not-working
2023.03.22 06:06 Educational-Nose223 Metanail Serum Pro Complex Reviews Reddit : My Experience On Metanail Complex ⚠️THE TRUTH⚠️
 | Metanail Serum Pro Complex Reviews Reddit : My Experience On Metanail Complex ⚠️THE TRUTH⚠️MetaNail is a topical formulation that combines 20 organic and essential nutrients to repair, rejuvenate, and improve the health of your nails.Metanail Serum Pro Many people have unsightly and unhealthy nails as a result of fungal infections. Many products claim to be able to strengthen and repair damaged nails, but the underlying cause is frequently ignored. Nail fungus is a common problem that can make you feel self-conscious about showing your toes in public. To treat nail fungus and other nail issues, doctors frequently recommend over-the-counter remedies and antibiotics. Some of these treatments, however, do not provide a long-term solution for poor nail health. MetaNail Serum Pro is a "maximum strength" formula for nail repair, hydration, and renewal. What is MetaNail Serum ProMetaNail is a topical formulation that combines 20 organic and essential nutrients to repair, rejuvenate, and improve the health of your nails. It is effective against fungus and brittle or cracked nails. The serum is simple to use and less dangerous than most oral and topical nail products.According to the manufacturer's website, MetaNail Serum Pro is intended to provide superior and long-lasting results. It can improve nail and foot health without causing any negative side effects. The ingredients in the 20-in-1 formula are safe and effective. MetaNail Serum Pro contains vitamins, minerals, and herbs that help to improve nail health from within. It contains no gluten, animal-based ingredients, or GMOs. The manufacturer follows GMP and FDA guidelines. Customers can expect significant improvements in the health of their feet and nails. How Does MetaNail Work?MetaNail Serum Pro is designed to eliminate dangerous nail fungi, including T. rubrum . Most Americans have nail fungus resulting from the T. rubrum variety. Specialists warn that the fungus is almost immune to the most widespread fungal treatment.T. rubrum is dangerous and can lead to fatal health issues. Without proper treatment, the fungus enters the bloodstream and destroys specific organs, including the lungs and heart. MetaNail maker claims it can "infect the bones and cause permanent toe damage.’ The serum can combat most fungal infections, including T. rubrum. How does it work? Hydrate Nail Cuticles – MetaNail maker reasons that cracked and brittle nails result from dehydrated cuticles. The serum improves hydration and strengthens the nail cuticles, thus warding off infections. Support Cellular Health – There are different antioxidants, polyphenols, and anti-inflammatory ingredients in MetaNail serum. These support nail health by eliminating toxins and supporting cell rejuvenation. The antioxidant effect can strengthen the nails and combat various forms of infections. Support Healthy Blood Flow – Damaged and infected nails can obstruct blood circulation in the feet and toenails. MetaNail Serum Pro can augment nutrient and oxygen absorption by boosting blood flow. Optimal blood movement accelerates healing, nourishes the toenails, and prevents fungal infections. Improve Collagen Synthesis – MetaNail Serum is rich in vitamins C and E that support collagen production and functions. The serum provides nutrients that stimulate collagen production, thus strengthening, shaping, and improving nails. Brittle and unhealthy nails primarily result from low collagen levels. MetaNail Serum Pro has multiple nutrients that enhance skin and nail health . Users may experience an improvement in the toenail's structure, shape, appearance, and texture a few days after using the topical serum. MetaNail Serum Pro IngredientsEach drop of MetaNail serum comprises 20 natural and safe ingredients. The manufacturer discloses all the ingredients in the nail serum upfront. The mixture of herbal extracts can enhance the health of skin and toenails. The active ingredients include: Witch Hazel, Horsetail, and Scots Pine Extract MetaNail maker refers to these three ingredients as "Powerhouse Trio," designed to eliminate fungal infections on the nails. The three nutrients are rich in multiple polyphenols and antioxidants. They work by eliminating toxins and free radicals damaging the nails . The three nutrients also soothe the nails and skin and augment blood flow. Glycerin Many beauty products and serums comprise glycerin because of its hydrating features. MetaNail is no exception. The nutrient works by hydrating the outer skin layer and nail cuticles. It can hinder the nails from weakening and cracking. Additionally, it can improve blood flow under the nails, thus boosting nutrient intake. Rosemary and Pelargonium Graveolens Rosemary and geranium are herbal extracts that moisturize the nails and skin. The duo can improve nail texture and appearance. In addition, MetaNail maker claims they may nourish the skin and strengthen the cuticles. Gotu Kola MetaNail Serum creator claims that Gotu Kola can hinder toxins from destroying the nails. The nutrient forms a protective barrier that prevents toxins and microbes from entering the skin and nails. Vitamins C and E The two vitamins are rich in antioxidants and thus common in most skin repair and immune-improving products. Vitamins C and E are abundant in most fruits and vegetables. MetaNail maker argues that the duo can improve healthy inflammations in the body and support toxin elimination. Additionally, a blend of vitamins C and E can enhance collagen synthesis. The compound is necessary for strengthening hair follicles, skin, and nails. Equally, collagen gives the nails shape, strength, and smooth texture. Lemon Peel and Aloe Vera The aloe Vera and lemon peel extract are dense in a particular protein, 14 kDa, designed to rejuvenate nail health. The specific protein strengthens the nail cuticles . Additionally, lemon peel and aloe Vera accelerate healing, reinforce nail integrity, and support growth. Hyaluronic Acid Hyaluronic acid is an anti-aging ingredient that may enhance skin health and prevent nails from becoming brittle. Hyaluronic acid is common in most skin serums because of its moisturizing effects. It can improve water retention and give nails a sturdy appearance. MSM MSM is a strengthening component in MetaNail Serum Pro. It can prevent the nails from becoming brittle and cracked. MSM fortifies joint health and can slow the aging process. Studies show that it may prevent the appearance of fine lines and wrinkles. Jojoba Seed Oil and Sage Leaf Extract Jojoba seed oil and sage leaf provides the nail and skin with antioxidant and anti-inflammatory nutrients. The pair can soothe and strengthen nails. Further, the two may prevent nails and skin from drying excessively. Organic Green Tea and Hops MetaNail Serum Pro formulator refers to the blend of green tea and hops as "true superheroes" that support skin and nail health. Green tea is dense in EGCG, and hops have various antioxidants to enhance skin health and fight nail infections. Regular application of the serum can give users multiple health benefits. All the ingredients in MetaNail are organized in a Colorado-based facility that complies with the GMP and FDA manufacturing principles. The nutrients are all safe and within acceptable dosages. Scientific Evidence on the Effectiveness of MetaNail Serum ProAccording to the official MetaNail Serum Pro website, over 74,000 users across the globe have tried the product. The creator claims the serum can curb mild-severe nail fungal infections. T. rubrum is among the worst fungal infections that are also life-threatening. A publication in the Journal of Clinical Microbiology in 2003 indicates that the fungus is worse in patients with immune problems. T. rubrum is hard to manage and can enter the bloodstream when left untreated. MetaNail Serum Pro addresses T. rubrum fungus and other nail infections without expensive medication. Green tea extract and other MetaNail serum ingredients can topically treat fungal infections. According to a 2015 scholarly study, green tea extract can treat candida albicans on tooth substrates. Additionally, EGCG constituents in green tea can fight multiple infections in the body. Vitamin C or ascorbic acid can eliminate various fungal growths. In a 2018 study, researchers discovered that the vitamin could prevent the growth of Aspergillus parasiticus and Candida albicans. In conclusion, MetaNail Serum Pro encompasses different moisturizing nutrients, antioxidants, and other ingredients that can heighten nail health. However, the maker recommends using the serum under the guidance of a professional doctor. How to Use MetaNail Serum ProMetaNail Pro is a topical product that is easy to use. The manufacturer recommends using it daily to eliminate nail fungus and improve toenail health.
Benefits of MetaNail Serum Pro
Pricing and AvailabilityMetaNail Serum Pro is only available on the official website . Customers making multiple orders get discounts plus bonuses. Below is how the pricing works:
Click Here To Visit MetaNail Serum Pro official website About MetaNail Total CleanseCustomers purchasing more than two MetaNail Serum Pro bottles receive one or two bottles of MetaNail Serum Total Cleanse. The oral supplement is designed to enhance the effectiveness of the topical serum. It works by boosting immunity and supporting detoxification.MetaNail Total Cleanse comprises natural laxatives and fibers to support detoxification and digestion. Some active ingredients include Bentonite clay, Psyllium husk, black walnut hull, flaxseed, oat bran, aloe Vera, plums, and a probiotic blend. Consuming two MetaNail Total Cleanse supplements daily can fight unhealthy toxins by improving digestive health. The creator argues that optimal gut health hinders toxins from accumulating, thus preventing nail infections. MetaNail Serum Pro Bonus eBooksSupercharge your Body – The digital book educates the readers on methods of fortifying natural immunity. It contains 50 resources that can augment your wellness both externally and internally.Biohacking Secrets – Modern technology can augment health. The eBook explains how you can use modern tools, research, and technology to heighten brain health. MetaNail Serum Pro Refund Policy Companies offering money-back assurance on their products appear more genuine. MetaNail Serum Pro comes with a 60-day or two-month money-back guarantee . The manufacturer claims you can request a complete refund if the formulation does not work as advertised within the stated days. FAQs about MetaNail Serum Pro SupplementQ: What causes nail fungus?A: Fungal infection results from different fungi that thrive in wet and hot conditions Q: What are the symptoms of nail fungal infections? A: Swelling, pain, bleeding, and nail discoloration are symptoms of fungal infections Q: Are fungal infections life-threatening? A: Some fungal infections can lead to toe amputation and blood infections when left untreated. Q: How does MetaNail Serum Pro support nail health? A: MetaNail Serum can repair, restore, and rejuvenate nails. ConclusionMetaNail Serum Pro is a 20-in-1 nail and feet natural formulation. The serum soothes, relaxes, and nourishes the nails and skin. It has multiple nutrients, vitamins, antioxidants, and minerals to fight fungal infections and other nail issues from the root. MetaNail Serum Pro is ideal for adults seeking an affordable and practical nail-improving supplement. Consumers can purchase the MetaNail Serum Pro formulation online at discounted prices.Click Here To Visit MetaNail Serum Pro official website |
2023.03.22 05:44 FuriusGeorge Single GPU Passthrough Help - AMD GPU (Nobara/Fedora OS to Win11 VM)
Hello All, u/wabulu,
I was able to successfully install Windows11 on a virtual machine before starting this passthrough process. I used the code here: https://github.com/ilayna/Single-GPU-passthrough-amd-nvidia to try to get the passthrough working, but when powering up the virtual machine my screen goes black before returning to a restart of my OS. Any help is appreciated.
Things of note:
/usbin/swtpm socket --ctrl type=unixio,path=/run/libvirt/qemu/swtpm/1-windows11-swtpm.sock,mode=0600 --tpmstate dir=/valib/libvirt/swtpm/639262e9-ead7-445a-9a82-cd2f241ad74c/tpm2,mode=0600 --log file=/valog/swtpm/libvirt/qemu/windows11-swtpm.log --terminate --tpm2
2023-03-22 03:50:31.586+0000: starting up libvirt version: 8.1.0, package: 2.fc36 (Fedora Project, 2022-03-13-01:12:58, ), qemu version: 6.2.0qemu-6.2.0-17.fc36, kernel: 6.0.14-201.fsync.fc36.x86_64, hostname: fedora
LC_ALL=C \
PATH=/uslocal/sbin:/uslocal/bin:/ussbin:/usbin \
HOME=/valib/libvirt/qemu/domain-1-windows11 \
XDG_DATA_HOME=/valib/libvirt/qemu/domain-1-windows11/.local/share \
XDG_CACHE_HOME=/valib/libvirt/qemu/domain-1-windows11/.cache \
XDG_CONFIG_HOME=/valib/libvirt/qemu/domain-1-windows11/.config \
/usbin/qemu-system-x86_64 \
-name guest=windows11,debug-threads=on \
-S \
-object '{"qom-type":"secret","id":"masterKey0","format":"raw","file":"/valib/libvirt/qemu/domain-1-windows11/master-key.aes"}' \
-blockdev '{"driver":"file","filename":"/usshare/edk2/ovmf/OVMF_CODE.secboot.fd","node-name":"libvirt-pflash0-storage","auto-read-only":true,"discard":"unmap"}' \
-blockdev '{"node-name":"libvirt-pflash0-format","read-only":true,"driver":"raw","file":"libvirt-pflash0-storage"}' \
-blockdev '{"driver":"file","filename":"/valib/libvirt/qemu/nvram/windows11_VARS.fd","node-name":"libvirt-pflash1-storage","auto-read-only":true,"discard":"unmap"}' \
-blockdev '{"node-name":"libvirt-pflash1-format","read-only":false,"driver":"raw","file":"libvirt-pflash1-storage"}' \
-machine pc-q35-6.2,usb=off,vmport=off,smm=on,dump-guest-core=off,pflash0=libvirt-pflash0-format,pflash1=libvirt-pflash1-format,memory-backend=pc.ram \
-accel kvm \
-cpu host,migratable=on,topoext=on,hv-time=on,hv-relaxed=on,hv-vapic=on,hv-spinlocks=0x1fff \
-global driver=cfi.pflash01,property=secure,value=on \
-m 8192 \
-object '{"qom-type":"memory-backend-ram","id":"pc.ram","size":8589934592}' \
-overcommit mem-lock=off \
-smp 10,sockets=1,dies=1,cores=5,threads=2 \
-uuid 639262e9-ead7-445a-9a82-cd2f241ad74c \
-no-user-config \
-nodefaults \
-chardev socket,id=charmonitor,fd=5,server=on,wait=off \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=localtime,driftfix=slew \
-global kvm-pit.lost_tick_policy=delay \
-no-hpet \
-no-shutdown \
-global ICH9-LPC.disable_s3=1 \
-global ICH9-LPC.disable_s4=1 \
-boot strict=on \
-device pcie-root-port,port=16,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,addr=0x2 \
-device pcie-root-port,port=17,chassis=2,id=pci.2,bus=pcie.0,addr=0x2.0x1 \
-device pcie-root-port,port=18,chassis=3,id=pci.3,bus=pcie.0,addr=0x2.0x2 \
-device pcie-root-port,port=19,chassis=4,id=pci.4,bus=pcie.0,addr=0x2.0x3 \
-device pcie-root-port,port=20,chassis=5,id=pci.5,bus=pcie.0,addr=0x2.0x4 \
-device pcie-root-port,port=21,chassis=6,id=pci.6,bus=pcie.0,addr=0x2.0x5 \
-device pcie-root-port,port=22,chassis=7,id=pci.7,bus=pcie.0,addr=0x2.0x6 \
-device pcie-root-port,port=23,chassis=8,id=pci.8,bus=pcie.0,addr=0x2.0x7 \
-device pcie-root-port,port=24,chassis=9,id=pci.9,bus=pcie.0,multifunction=on,addr=0x3 \
-device pcie-root-port,port=25,chassis=10,id=pci.10,bus=pcie.0,addr=0x3.0x1 \
-device pcie-root-port,port=26,chassis=11,id=pci.11,bus=pcie.0,addr=0x3.0x2 \
-device pcie-root-port,port=27,chassis=12,id=pci.12,bus=pcie.0,addr=0x3.0x3 \
-device pcie-root-port,port=28,chassis=13,id=pci.13,bus=pcie.0,addr=0x3.0x4 \
-device pcie-root-port,port=29,chassis=14,id=pci.14,bus=pcie.0,addr=0x3.0x5 \
-device qemu-xhci,p2=15,p3=15,id=usb,bus=pci.2,addr=0x0 \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.3,addr=0x0 \
-blockdev '{"driver":"file","filename":"/gamespace/windows11.qcow2","node-name":"libvirt-3-storage","auto-read-only":true,"discard":"unmap"}' \
-blockdev '{"node-name":"libvirt-3-format","read-only":false,"driver":"qcow2","file":"libvirt-3-storage","backing":null}' \
-device virtio-blk-pci,bus=pci.4,addr=0x0,drive=libvirt-3-format,id=virtio-disk0,bootindex=1 \
-device ide-cd,bus=ide.1,id=sata0-0-1 \
-device ide-cd,bus=ide.2,id=sata0-0-2 \
-netdev tap,fd=17,id=hostnet0,vhost=on,vhostfd=21 \
-device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:43:12:40,bus=pci.1,addr=0x0 \
-chardev pty,id=charserial0 \
-device isa-serial,chardev=charserial0,id=serial0,index=0 \
-chardev socket,id=chrtpm,path=/run/libvirt/qemu/swtpm/1-windows11-swtpm.sock \
-tpmdev emulator,id=tpm-tpm0,chardev=chrtpm \
-device tpm-tis,tpmdev=tpm-tpm0,id=tpm0 \
-audiodev '{"id":"audio1","driver":"none"}' \
-vnc 127.0.0.1:0,audiodev=audio1 \
-chardev spicevmc,id=charredir0,name=usbredir \
-device usb-redir,chardev=charredir0,id=redir0,bus=usb.0,port=2 \
-chardev spicevmc,id=charredir1,name=usbredir \
-device usb-redir,chardev=charredir1,id=redir1,bus=usb.0,port=3 \
-device usb-host,hostdevice=/dev/bus/usb/001/008,id=hostdev0,bus=usb.0,port=1 \
-device usb-host,hostdevice=/dev/bus/usb/001/003,id=hostdev1,bus=usb.0,port=4 \
-device usb-host,hostdevice=/dev/bus/usb/001/002,id=hostdev2,bus=usb.0,port=5 \
-device vfio-pci,host=0000:0b:00.0,id=hostdev3,bus=pci.6,addr=0x0 \
-device vfio-pci,host=0000:0b:00.1,id=hostdev4,bus=pci.7,addr=0x0 \
-device virtio-balloon-pci,id=balloon0,bus=pci.5,addr=0x0 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
-msg timestamp=on
libvirt: error : libvirtd quit during handshake: Input/output error
2023-03-22 03:50:31.589+0000: shutting down, reason=failed
submitted by FuriusGeorge to VFIO [link] [comments]
I was able to successfully install Windows11 on a virtual machine before starting this passthrough process. I used the code here: https://github.com/ilayna/Single-GPU-passthrough-amd-nvidia to try to get the passthrough working, but when powering up the virtual machine my screen goes black before returning to a restart of my OS. Any help is appreciated.
Things of note:
- My VM is named "windows11" rather than "win10" and I made the change to the qemu file as indicated in the github instructions.
- I added the 0000:0B:00:0 Advanced Micro Devices, Inc. [AMD/ATI] Navi 23 [Radeon RX 6600/6600 XT/6600M] hardware to VirtualManager with ROM BAR checked
- I added the 0000:0B:00:1 Advanced Micro Devices, Inc. [AMD/ATI] Navi 21/23 HDMI/DP Audio Controller hardware to VirtualManager with ROM BAR checked
- I added 3 USB devices to the VirtualManager (keyboard, mouse, headset) and all were plugged in when I attempted to start the VM
- Guides state removing Video QXL from the VirtualManager, but the 'Remove' button is greyed out, so I just set it to "None"
- I added the following line to the CPUs XML (below topology line) in the VirtualManager due to a message being thrown up by the log "
" - The ~/qemu/windows11.log is as follows:
/usbin/swtpm socket --ctrl type=unixio,path=/run/libvirt/qemu/swtpm/1-windows11-swtpm.sock,mode=0600 --tpmstate dir=/valib/libvirt/swtpm/639262e9-ead7-445a-9a82-cd2f241ad74c/tpm2,mode=0600 --log file=/valog/swtpm/libvirt/qemu/windows11-swtpm.log --terminate --tpm2
2023-03-22 03:50:31.586+0000: starting up libvirt version: 8.1.0, package: 2.fc36 (Fedora Project, 2022-03-13-01:12:58, ), qemu version: 6.2.0qemu-6.2.0-17.fc36, kernel: 6.0.14-201.fsync.fc36.x86_64, hostname: fedora
LC_ALL=C \
PATH=/uslocal/sbin:/uslocal/bin:/ussbin:/usbin \
HOME=/valib/libvirt/qemu/domain-1-windows11 \
XDG_DATA_HOME=/valib/libvirt/qemu/domain-1-windows11/.local/share \
XDG_CACHE_HOME=/valib/libvirt/qemu/domain-1-windows11/.cache \
XDG_CONFIG_HOME=/valib/libvirt/qemu/domain-1-windows11/.config \
/usbin/qemu-system-x86_64 \
-name guest=windows11,debug-threads=on \
-S \
-object '{"qom-type":"secret","id":"masterKey0","format":"raw","file":"/valib/libvirt/qemu/domain-1-windows11/master-key.aes"}' \
-blockdev '{"driver":"file","filename":"/usshare/edk2/ovmf/OVMF_CODE.secboot.fd","node-name":"libvirt-pflash0-storage","auto-read-only":true,"discard":"unmap"}' \
-blockdev '{"node-name":"libvirt-pflash0-format","read-only":true,"driver":"raw","file":"libvirt-pflash0-storage"}' \
-blockdev '{"driver":"file","filename":"/valib/libvirt/qemu/nvram/windows11_VARS.fd","node-name":"libvirt-pflash1-storage","auto-read-only":true,"discard":"unmap"}' \
-blockdev '{"node-name":"libvirt-pflash1-format","read-only":false,"driver":"raw","file":"libvirt-pflash1-storage"}' \
-machine pc-q35-6.2,usb=off,vmport=off,smm=on,dump-guest-core=off,pflash0=libvirt-pflash0-format,pflash1=libvirt-pflash1-format,memory-backend=pc.ram \
-accel kvm \
-cpu host,migratable=on,topoext=on,hv-time=on,hv-relaxed=on,hv-vapic=on,hv-spinlocks=0x1fff \
-global driver=cfi.pflash01,property=secure,value=on \
-m 8192 \
-object '{"qom-type":"memory-backend-ram","id":"pc.ram","size":8589934592}' \
-overcommit mem-lock=off \
-smp 10,sockets=1,dies=1,cores=5,threads=2 \
-uuid 639262e9-ead7-445a-9a82-cd2f241ad74c \
-no-user-config \
-nodefaults \
-chardev socket,id=charmonitor,fd=5,server=on,wait=off \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=localtime,driftfix=slew \
-global kvm-pit.lost_tick_policy=delay \
-no-hpet \
-no-shutdown \
-global ICH9-LPC.disable_s3=1 \
-global ICH9-LPC.disable_s4=1 \
-boot strict=on \
-device pcie-root-port,port=16,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,addr=0x2 \
-device pcie-root-port,port=17,chassis=2,id=pci.2,bus=pcie.0,addr=0x2.0x1 \
-device pcie-root-port,port=18,chassis=3,id=pci.3,bus=pcie.0,addr=0x2.0x2 \
-device pcie-root-port,port=19,chassis=4,id=pci.4,bus=pcie.0,addr=0x2.0x3 \
-device pcie-root-port,port=20,chassis=5,id=pci.5,bus=pcie.0,addr=0x2.0x4 \
-device pcie-root-port,port=21,chassis=6,id=pci.6,bus=pcie.0,addr=0x2.0x5 \
-device pcie-root-port,port=22,chassis=7,id=pci.7,bus=pcie.0,addr=0x2.0x6 \
-device pcie-root-port,port=23,chassis=8,id=pci.8,bus=pcie.0,addr=0x2.0x7 \
-device pcie-root-port,port=24,chassis=9,id=pci.9,bus=pcie.0,multifunction=on,addr=0x3 \
-device pcie-root-port,port=25,chassis=10,id=pci.10,bus=pcie.0,addr=0x3.0x1 \
-device pcie-root-port,port=26,chassis=11,id=pci.11,bus=pcie.0,addr=0x3.0x2 \
-device pcie-root-port,port=27,chassis=12,id=pci.12,bus=pcie.0,addr=0x3.0x3 \
-device pcie-root-port,port=28,chassis=13,id=pci.13,bus=pcie.0,addr=0x3.0x4 \
-device pcie-root-port,port=29,chassis=14,id=pci.14,bus=pcie.0,addr=0x3.0x5 \
-device qemu-xhci,p2=15,p3=15,id=usb,bus=pci.2,addr=0x0 \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.3,addr=0x0 \
-blockdev '{"driver":"file","filename":"/gamespace/windows11.qcow2","node-name":"libvirt-3-storage","auto-read-only":true,"discard":"unmap"}' \
-blockdev '{"node-name":"libvirt-3-format","read-only":false,"driver":"qcow2","file":"libvirt-3-storage","backing":null}' \
-device virtio-blk-pci,bus=pci.4,addr=0x0,drive=libvirt-3-format,id=virtio-disk0,bootindex=1 \
-device ide-cd,bus=ide.1,id=sata0-0-1 \
-device ide-cd,bus=ide.2,id=sata0-0-2 \
-netdev tap,fd=17,id=hostnet0,vhost=on,vhostfd=21 \
-device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:43:12:40,bus=pci.1,addr=0x0 \
-chardev pty,id=charserial0 \
-device isa-serial,chardev=charserial0,id=serial0,index=0 \
-chardev socket,id=chrtpm,path=/run/libvirt/qemu/swtpm/1-windows11-swtpm.sock \
-tpmdev emulator,id=tpm-tpm0,chardev=chrtpm \
-device tpm-tis,tpmdev=tpm-tpm0,id=tpm0 \
-audiodev '{"id":"audio1","driver":"none"}' \
-vnc 127.0.0.1:0,audiodev=audio1 \
-chardev spicevmc,id=charredir0,name=usbredir \
-device usb-redir,chardev=charredir0,id=redir0,bus=usb.0,port=2 \
-chardev spicevmc,id=charredir1,name=usbredir \
-device usb-redir,chardev=charredir1,id=redir1,bus=usb.0,port=3 \
-device usb-host,hostdevice=/dev/bus/usb/001/008,id=hostdev0,bus=usb.0,port=1 \
-device usb-host,hostdevice=/dev/bus/usb/001/003,id=hostdev1,bus=usb.0,port=4 \
-device usb-host,hostdevice=/dev/bus/usb/001/002,id=hostdev2,bus=usb.0,port=5 \
-device vfio-pci,host=0000:0b:00.0,id=hostdev3,bus=pci.6,addr=0x0 \
-device vfio-pci,host=0000:0b:00.1,id=hostdev4,bus=pci.7,addr=0x0 \
-device virtio-balloon-pci,id=balloon0,bus=pci.5,addr=0x0 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
-msg timestamp=on
libvirt: error : libvirtd quit during handshake: Input/output error
2023-03-22 03:50:31.589+0000: shutting down, reason=failed
2023.03.22 05:37 messyhuman987 What am I doing with my life? No motivation or direction, prone to depression.
 | When I was younger, I thought my ability to go with the flow was an asset. Now that I'm older, I feel like I have nothing to offer. I'm not great at anything in particular, I have zero career goals. I'm not interesting. I need a purpose and I think that is partly why I'm depressed most of the time. I'm in my mid 30s, bogged down, and restless. Please help! submitted by messyhuman987 to AskAstrologers [link] [comments] |
2023.03.22 05:36 messyhuman987 What am I doing with my life? No motivation or direction, prone to depression.
 | When I was younger, I thought my ability to go with the flow was an asset. Now that I'm older, I feel like I have nothing to offer. I'm not great at anything in particular, I have zero career goals. I'm not interesting. I need a purpose and I think that is partly why I'm depressed most of the time. I'm in my mid 30s, bogged down, and restless. Please help! submitted by messyhuman987 to AskAstrologers [link] [comments] |
2023.03.22 04:50 JimbyJonez Long term neutropenia
30F, 5”3, 56kg, non-smoker, Graves’ disease (remission), previous EBV infection (months ago).
I have been experiencing long-term neutropenia on and off for around a year and a half now. Initially, my endocrinologist thought that it was drug induced from the carbimazole, but four months on from ceasing the medication I was still periodically dropping to 1.3-1.5, and have continued to do so ever since I stopped in July 2022. The endocrinologist now believes it was a pre-existing issue prior to my diagnosis. I was referred to a haematologist who did a multitude of tests, and received my lowest numbers yet, 1.1. I was told that the length of the ongoing neutropenia and the subsequent very low numbers warranted a bone marrow biopsy, and have an appointment at the end of April to undergo the procedure, I also have a CT scan tomorrow.
My other symptoms consist of periodically swollen (in some cases permanently) lymph nodes in the neck and armpits, palpable lumps in the stomach, on the shins, in between the thighs and on forearms, hyperhidrosis that did not resolve after graves treatment, fatigue, joint and muscle pain, severe periodic abdominal pain in general and when passing stools (cramping) constant gas and bloating and acid reflux. My thyroid levels are normal, all over levels are normal, but my neutrophils are consistently low and have been for a very long time.
The only thing my haematologist has suggested she thinks might be causing me pain is endometriosis, but apart from abdominal bloating and cramping (outside of menstruation), I seem to have no symptoms of it. Is there something she isn’t telling me?
submitted by JimbyJonez to AskDocs [link] [comments]
I have been experiencing long-term neutropenia on and off for around a year and a half now. Initially, my endocrinologist thought that it was drug induced from the carbimazole, but four months on from ceasing the medication I was still periodically dropping to 1.3-1.5, and have continued to do so ever since I stopped in July 2022. The endocrinologist now believes it was a pre-existing issue prior to my diagnosis. I was referred to a haematologist who did a multitude of tests, and received my lowest numbers yet, 1.1. I was told that the length of the ongoing neutropenia and the subsequent very low numbers warranted a bone marrow biopsy, and have an appointment at the end of April to undergo the procedure, I also have a CT scan tomorrow.
My other symptoms consist of periodically swollen (in some cases permanently) lymph nodes in the neck and armpits, palpable lumps in the stomach, on the shins, in between the thighs and on forearms, hyperhidrosis that did not resolve after graves treatment, fatigue, joint and muscle pain, severe periodic abdominal pain in general and when passing stools (cramping) constant gas and bloating and acid reflux. My thyroid levels are normal, all over levels are normal, but my neutrophils are consistently low and have been for a very long time.
The only thing my haematologist has suggested she thinks might be causing me pain is endometriosis, but apart from abdominal bloating and cramping (outside of menstruation), I seem to have no symptoms of it. Is there something she isn’t telling me?
2023.03.22 03:48 tommonay AITA for telling my coworker (F) her remarks against me (M) were sexist?
I know this can be a contentious subject, so I'd like to open by saying I am fully aware of the privilege I receive in this world as a straight white man.
I work in a role that can be watered down to sales. I represent my company in talks with all external parties and potential partners. A necessary characteristic of sales is confidence, and when it comes to my talks/presentations/proposals I like to think that I can active said confidence with ease.
Off stage, however, I do suffer from anxiety and stress like any other human, and I have to mentally prepare for all my meetings with the same amount of care as any other professional would. It is an emotionally taxing role to be constantly excited about the latest project we are working on, and it can leave me feeling drained.
I recently left a conversation with a potential business partner where one of my colleagues tagged along. She is not in sales but was relevant to the conversation. As we were debriefing afterwards, I forget how it came about, but she mentioned that I found it easy to be so confident because I was a white man.
I was taken aback. I conceded, of course, I have had privilege in both my gender and sexuality to get me to where I am today, but I told her that she doesn't know anything about what it took to get me to where I am and that I found the remark to be sexist. She laughed it off and asked if I was serious. I doubled down, saying it was in the same line as if I were to say a woman was good at being in an administrative or PR role because she was a woman.
We left it at that, with no bad blood, and soon after went our separate ways. We haven't spoken since in a few days. I told a fellow (M) coworker and he suggested it was nothing worth worrying about.
I'm wondering, did I overreact? I always try to be conscious of the current climate around privilege, and am not ignorant to the benefits I've had from my upbringing, but I also have spent years curating my skillset to become good at what I do and it hurt me to have that all discounted down to me simply being a white man. I have read a great deal of books, browse contemporary market research, and search for brand insights with each individual client I speak with, and I like to think it is that work that gives me my confidence, not my skin pigmentation and my genitalia. The whole interaction left me feeling kind of shitty.
submitted by tommonay to AmItheAsshole [link] [comments]
I work in a role that can be watered down to sales. I represent my company in talks with all external parties and potential partners. A necessary characteristic of sales is confidence, and when it comes to my talks/presentations/proposals I like to think that I can active said confidence with ease.
Off stage, however, I do suffer from anxiety and stress like any other human, and I have to mentally prepare for all my meetings with the same amount of care as any other professional would. It is an emotionally taxing role to be constantly excited about the latest project we are working on, and it can leave me feeling drained.
I recently left a conversation with a potential business partner where one of my colleagues tagged along. She is not in sales but was relevant to the conversation. As we were debriefing afterwards, I forget how it came about, but she mentioned that I found it easy to be so confident because I was a white man.
I was taken aback. I conceded, of course, I have had privilege in both my gender and sexuality to get me to where I am today, but I told her that she doesn't know anything about what it took to get me to where I am and that I found the remark to be sexist. She laughed it off and asked if I was serious. I doubled down, saying it was in the same line as if I were to say a woman was good at being in an administrative or PR role because she was a woman.
We left it at that, with no bad blood, and soon after went our separate ways. We haven't spoken since in a few days. I told a fellow (M) coworker and he suggested it was nothing worth worrying about.
I'm wondering, did I overreact? I always try to be conscious of the current climate around privilege, and am not ignorant to the benefits I've had from my upbringing, but I also have spent years curating my skillset to become good at what I do and it hurt me to have that all discounted down to me simply being a white man. I have read a great deal of books, browse contemporary market research, and search for brand insights with each individual client I speak with, and I like to think it is that work that gives me my confidence, not my skin pigmentation and my genitalia. The whole interaction left me feeling kind of shitty.
2023.03.22 03:46 Ok-Examination4961 Putting Extra on the House Strategies
TLDR; Increase in student stipend leaves me with 5-700 a month extra. I am terrified of losing my home due to childhood trauma. I want to pay it down fast (which I know, not smartest thing to do) and be the first in my family to own their house. What is the max I can allocate to extra payments without putting myself in a tough spot?
I net about $2,900 a month compared to my previous student stipend of $1,800. I was cutting it just even with about $50-75 left over prior to the raise to $2,900. We do not get ANY benefits as students (401k, PTO, etc).
After making some moderate adjustments to what I am paying on debt (house, car), I should still have about $700 left over each month after all bills are considered. In October I will get another raise from my funding source and will have $1,000 left over each month. I will have raises every six months until reaching the max level which will put me at $1,400 left over each month right before graduation. I realize this is a super fortunate situation and am grateful for the external funding opportunity.
To make my student stipend work, I bought a house as mortgages are much cheaper than apartments near my school. (For any students reading this, my keys-in-hands costs were less than 10k). My PITI is about $600. In the fall I overpaid by $100 ($700 total) and was on track to pay off my house in 23 years. After getting the raise I increased payment on my house to $200 extra ($800 total) to pay off in 17. Basically for every $100 extra added my current arrangement, I will shave another 2-3 years off the mortgage until I hit $500 extra. Obviously the returns become frustratingly smaller with each dollar added to an extra payment once about $500 extra is hit. People not owning their houses in my family resulted in some really crummy situations, so actually owning my house means a lot to me as I would always have a home-base. I also would like to buy a second house when I graduate and rent out my current house if possible, so getting this current house to "cash neutral/positive" faster is attractive to me. If I live in this house prior graduating with my doctorate and obtaining a job, I will be frugal and pay it off the year I start working my post-degree job.
I also have really extensive extra insurance policies that lead me to not needing a large emergency fund, but I am working towards $5k in savings. A new roof, because my house is very small, would be less than $3k and thats the only item on my house that is not covered. My car has a great warranty as it is a car I bought new. I realize that a lot of folks would recommend investing or a high yield savings account instead, and I am definitely considering that but I would also like to hear tips for regular folk trying to buy multiple properties and weigh the pros/cons of paying things off ahead of schedule.
submitted by Ok-Examination4961 to personalfinance [link] [comments]
I net about $2,900 a month compared to my previous student stipend of $1,800. I was cutting it just even with about $50-75 left over prior to the raise to $2,900. We do not get ANY benefits as students (401k, PTO, etc).
After making some moderate adjustments to what I am paying on debt (house, car), I should still have about $700 left over each month after all bills are considered. In October I will get another raise from my funding source and will have $1,000 left over each month. I will have raises every six months until reaching the max level which will put me at $1,400 left over each month right before graduation. I realize this is a super fortunate situation and am grateful for the external funding opportunity.
To make my student stipend work, I bought a house as mortgages are much cheaper than apartments near my school. (For any students reading this, my keys-in-hands costs were less than 10k). My PITI is about $600. In the fall I overpaid by $100 ($700 total) and was on track to pay off my house in 23 years. After getting the raise I increased payment on my house to $200 extra ($800 total) to pay off in 17. Basically for every $100 extra added my current arrangement, I will shave another 2-3 years off the mortgage until I hit $500 extra. Obviously the returns become frustratingly smaller with each dollar added to an extra payment once about $500 extra is hit. People not owning their houses in my family resulted in some really crummy situations, so actually owning my house means a lot to me as I would always have a home-base. I also would like to buy a second house when I graduate and rent out my current house if possible, so getting this current house to "cash neutral/positive" faster is attractive to me. If I live in this house prior graduating with my doctorate and obtaining a job, I will be frugal and pay it off the year I start working my post-degree job.
I also have really extensive extra insurance policies that lead me to not needing a large emergency fund, but I am working towards $5k in savings. A new roof, because my house is very small, would be less than $3k and thats the only item on my house that is not covered. My car has a great warranty as it is a car I bought new. I realize that a lot of folks would recommend investing or a high yield savings account instead, and I am definitely considering that but I would also like to hear tips for regular folk trying to buy multiple properties and weigh the pros/cons of paying things off ahead of schedule.
2023.03.22 03:40 CookieCold3216 Has somebody experience with Immunotherapy ?
Hello everyone,
I (M26) received my diagnosis last week on monday after I had some minor issues for the last 3 months. Sadly they found a tumor and after all scans came back it was classified as T3N1M0 (one lymph node).
I had a talk with a doctor today and they told me i have two options:
So does anybody has experience with this kind of treatment ?
And did it work out for you ( recurrence ...)?
Wish you all the best ! :)
submitted by CookieCold3216 to coloncancer [link] [comments]
I (M26) received my diagnosis last week on monday after I had some minor issues for the last 3 months. Sadly they found a tumor and after all scans came back it was classified as T3N1M0 (one lymph node).
I had a talk with a doctor today and they told me i have two options:
- Immunotherapy since my tumor has some kind of mutations which supports that kind of treatment. I probably wouldn't need surgery / chemo therapy
- Chemo therapy + radiation and surgery afterwards
So does anybody has experience with this kind of treatment ?
And did it work out for you ( recurrence ...)?
Wish you all the best ! :)
2023.03.22 03:34 BrokenTeddy All Ships/Vehicles Currently In-Game/In Concept in Star Citizen 3.18 With Images]
![All Ships/Vehicles Currently In-Game/In Concept in Star Citizen 3.18 With Images]](https://b.thumbs.redditmedia.com/SKULYEUiR77dMOVLaWg1tac2mMH7zroAvfz259Bib8M.jpg "All Ships/Vehicles Currently In-Game/In Concept in Star Citizen 3.18 With Images]") | Number of In-Game Ships as of 3.18: 149Origin: 14 (13 True Ships) 85x, M50, 100i, 125a, 135c, 300i, 315p, 325a, 350r, 400i, 600i Touring, 600i Exploration,https://preview.redd.it/3vmonvy3h6pa1.png?width=2124&format=png&auto=webp&s=0a4e884dbe0876aee021803561dd479bbc41c9a1 Esperia: 5 (5 True Ships) Prowler, Glaive, Blade, Strike, Talon, Unique Hulls: 4 Banu: 1 (1 True Ship) Banu Defender, Unique Hulls: 1 Vanduul: 1 (1 True Ship) Scythe, Unique Hulls: 1 https://preview.redd.it/oyohfvufi6pa1.png?width=1670&format=png&auto=webp&s=6e3c87689d2b44c5f91a45f3ec55315c9e0803d1 Kruger Intergalactic: 3 (2 True Ships) P-72 Archimedes, From left to right: Khartu-Al, P-72 Archimedes, P-72 Archimedes representing the 'Emerald' skin variant, P-52 Merlin, Nox, Nox Kue. Argo Astronautics: 6 (4 True Ships) Mole, From left to right: Mole, Mole representing the Carbon Edition, Mole representing the Talus Edition, RAFT, MPUV 1-P, MPUV 1-C. Greycat: 4 (4 True Ships) ROC DS, ROC, STV, PTV, Unique Hulls: 4 Vehicles listed above are in chronological order. Tumbril: 7 (7 True Ships) Nova, Cyclone TR, Cyclone RN, Cyclone RC, Cyclone MT, Cyclone AA, Cyclone, Unique Hulls: 2 Vehicles listed above are in chronological order. Consolidated Outland: 8 (7 True Ships) Nomad, Mustang Omega, Mustang Gamma, Mustang Delta, Mustang Beta, Mustang Alpha, Ships listed above are in chronological order. The second Mustang Alpha represents the Alpha Vindicator. Aegis: 21 (15 True Ships) Avenger Titan, Avenger Stalker, Avenger Warlock, The additional Reclaimer, Hammerhead, and Gladius variants represent their alternate skin variants. Anvil: 23 (17 True Ships) C8 Pisces, C8X Pisces, C8R Pisces, Arrow, Hawk, F7C Hornet, The additional Valkyrie and Ballista variants represent their alternate skin variants. MISC: 15 (15 True Ships) Razor, Razor EX, Razor LX, Reliant Kore, Reliant Sen, Reliant Tana, Reliant Mako, Freelancer, Freelancer MIS, Freelancer DUR, Freelancer Max, Prospector, Starfarer, Starfarer Gemini, Hull A, Unique Hulls: 6 https://preview.redd.it/a0lbfmj3u6pa1.png?width=1896&format=png&auto=webp&s=dd26e90260458efd864e33f90636393a2fc7a864 Drake: 17 (11 True Ships) Dragonfly, The additional Caterpillar and Cutlass Black variants represent their alternate skin variants. RSI: 15 (13 True Ships) Aurora CL, Aurora ES, Aurora LN, Aurora LX, Aurora MR, Mantis, Scorpius, Scorpius Antares, Constellation Andromeda, Constellation Aquila, Constellation Phoenix, The additional Phoenix and Rover variants represent their alternate skin variants. Crusader Industries: 6 (6 True Ships) Mercury Star Runner, M2 Hercules Starlifter, A2 Hercules Starlifter, C2 Hercules Starlifter, Ares Starfighter Ion, Ares Starfighter Inferno, Unique Hulls: 3 https://preview.redd.it/bf6iz3gww6pa1.png?width=1320&format=png&auto=webp&s=7220e12797ad96ed9e5dba736178c7477da165f0 Total Ships/Vehicles with alternate skins/slight loadout variations: 23 Total Unique Hulls In-Game: 71 Total In Game Legitimate "True" Ship/Vehicle variations: 126 Terminology:"True" Ship definition: A ship that is truly distinct in some aspect fundamental to its composition. Distinction can be noted as it pertains to the hull itself, the interior, or some combination of the two. For example, the F7C-M Super Hornet and the F7C-M Super Hornet Heartseeker are listed as 2 different ships. However, these 2 ships are fundamentally the same. The only differentiating factor between the 2 is the Heartseaker’s slightly upgraded base loadout and skin variant. Because the loadout of the Heartseaker is not a fundamental advantage of the model (because the original Super Hornet can obtain the same loadout by purchasing better weapons), I don't deem it to be a "True" ship. For if one were to strip the Heartseaker of its weapons and livery, it would be indistinguishable from the base F7C-M Super Hornet--their bases are fundamentally the same. Thus only 1 "True Ship" exists among the two. A simple metric to use as a quick mode of deduction references the Masters of Flight Series. Per the Star Citizen Wiki: The Masters of Flight is a ship series created in conjunction with the flight-sim Arena Commander. It is a series of ships that have a different loadout and livery from the stock ship. Any Ship that fails to surpass the level of alterations made to a MoF ship, fails to qualify as a "True" ship."Unique Hull'' definition: A hull is the base of a ship, not its superstructure. To determine the base and what makes it "unique", I've left a ramble I wrote in response to a commenter asking for the Freelancer Max to be classified as a "Unique Hull": When looking at the base of the Freelancer as a series, the hull consists of everything front of the cargo compartment. In this way, the cargo back-end of the Freelancer is a module element apart of its superstructure. If the basis for determining that a variant is a "Unique Hull '' is solely predicated on external changes to the metrics of a model, then the Cutlass Steel, with its slightly protruding remote aft turret, should qualify. If the basis for determination centers around changes to the body of a vehicle, then the 315p, with its expanded cargo storage and tractor beam, should also qualify as a "Uniquely Hulled" ship. If a ‘Unique Hull’ classification is established upon changes to the internal metric size of a model, then wouldn't the Endeavor classify as a multitude of ships? Would the MPUV series now also be classified as a group of "Uniquely Hulled" ships because their internal metrics change when their modules are swapped? And if one is to make the argument that the Max's classification should be changed, wouldn't one also make the argument that the Taurus must be reclassified, as it features a longer exterior and a (somewhat) revamped and extended interior to boot? Like the Max, the hull--the base of the ship--is fundamentally the same--that deference is my ultimate concern. The added modular elements from both the Max and the Taurus are ultimately inferior--ie. supplemental--to the overwhelming stature of the hull itself. In other words, the hull retains dominance over the minority advancements granted by their subsequent variations. If I were to strip the "hull" of the Freelancer Max, what's left wouldn't have anything in common with the rest of the Freelancer series. What's left--its variational qualities--would fail to present itself as a hull, or anything emblematic of any kind of dominant, vehicular structure. Noting this, it becomes clear the relationship between the hull and its additives. So long as the hull retains dominance over a variant's changes, such a variant will be classified as not owning a unique hull, because ownership of a unique hull is a dominant position. Number of Remaining Concept Ships as of 3.18: 49Misc: 7 Hull B, Hull C, Hull D, Hull E, Endeavor, Odyssey, Expanse, Unique Hulls: 7https://preview.redd.it/sc61277iz6pa1.png?width=880&format=png&auto=webp&s=fb67a04bddd911cc878d068efd2f25645140416d Aegis: 8 (7 True Ships) Idris M, Idris K, Idris P, Javelin, Nautilus, The additional Nautilus represents the Solstice Edition. Anvil: 6 (5 True Ships) Crucible, F7A Hornet, Liberator, Legionnaire, F8C Lightning, https://preview.redd.it/7d3qz01q07pa1.png?width=1066&format=png&auto=webp&s=9c0df50f85d36583d5ffed95607be1819d0e71c1 Aopopa: 1 San'Tok'Yai, Unique Hulls: 1 Argo: 1 SRV, Unique Hulls: 1 Banu: 1 Merchantman, Unique Hulls: 1 Gatac Manufacture: 1 Railen, Unique Hulls: 1 Consolidated Outland: 1 Pioneer, Unique Hulls: 1 Drake Interplanetary: 2 Kraken, Kraken Privateer, Unique Hulls: 1 https://preview.redd.it/jbs3zwxo37pa1.png?width=1836&format=png&auto=webp&s=41f7c5e0138786ba99e4a26d969636a30906aea1 Esperia: 0 None Kruger Intergalactic: 0 None Crusader Industries: 4 Genesis Starliner, A1 Spirit, C1 Spirit, E1 Spirit, Unique Hulls: 2 https://preview.redd.it/tad7vx9i27pa1.png?width=1026&format=png&auto=webp&s=1d72ce188e6e5b51c30a432873bcb807ea8778a3 Tumbril: 3 Ranger CV, Ranger RC, Ranger TR, Unique Hulls: 1 Origin Jumpworks: 6 X1, X1 Force, X1 Velocity, G12, G12a, G12r, Unique Hulls: 2 Greycat: 1 UTV, Unique Hulls: 1 Vehicles listed above are in chronological order. RSI: 7 Apollo Triage, Apollo Medivac, Orion, Perseus, Polaris, Lynx, Galaxy, Unique Hulls: 6 https://preview.redd.it/8kye89bu87pa1.png?width=924&format=png&auto=webp&s=e0df77b6bda6c3cf027f932714391f95e3f77969 Total Unique Hulls In-Concept: 35 (34 if you exclude the Lightning variants) Total Concept Ships/Vehicles with alternate skins/slight loadout variations: 2 (1 if you exclude the Lightning variants) Total In Concept Legitimate ("True") Ship/Vehicle variations: 47 (45 if you exclude the Lightning variants) Concluding Statistics:Total Unique Hulls: 71 (In Game) + 35 (In Concept) = 106 (66.98% of Unique Hulls in Game as of 3.18.)Total Sold Ships: 149 (In Game) + 49 (In Concept) = 198 (75.25% of Sold Ships in Game as of 3.18.) Total Sold "True" Ships: 126 (In Game) + 47 (In Concept) = 173 (72.83% of "True" Ships in Game as of 3.18.) \**Please note that the above figures include both the F8C Lightning & the F8C Lightning Executive edition which were never officially sold but have been offered as rewards. If you subtract both Lightning models from the numbers above, you end up with:* 104 Total Unique Hulls (68.27% of Unique Hulls in Game as of 3.18.) 196 Total Sold Ships (76.02% of Sold Ships in Game as of 3.18.) 171 Total Sold "True" Ships (73.68% of Sold "True" Ships in Game as of 3.18.)\*\** |
2023.03.22 03:14 Banana_berry23 For those of you who underwent " cervical lymph node dissection" with thyroidectomy, how did you do after surgery?
My partner is going for surgery tomorrow. The surgeon has asked for consent for total thyroidectomy and cervical lymph node dissection separately, so that LN dissection would be done only if needed. I was wondering how extensive the surgery would be with LN dissection and what would be the risks/ complications expected? Could any of you please share your experience with it? Thank you for your help.
submitted by Banana_berry23 to thyroidcancer [link] [comments]
2023.03.22 03:07 Better-Pause5183 I'm terrified that I have vulvar cancer.
Hi,
I'm happy to link to a photo if anyone wants to see after this post. But basically I'm 27, and have had vulvar itching all my life. I've never had a Pap because of trauma reasons. The last time I saw my gyro (only ever had external exams) she said she didn't see anything of concern, but I can't remember if she said anything else, and this was 2 years ago.
I have either always had or had for at least a couple years this clearish/pink-skin-colored patch that's only seen when I part my inner labia. It's on my left side. It doesn't hurt. When I touch it, it's a bit bumpy/rough. It's not projecting outwards, but it does seem very slightly raised in a plaque-like way. It's squiggly, kind of. I thought of papillomatosis, of Fordyce spots, of everything. And yet I can't shake the vulvar cancer or intraepithelial fear.
To make matters worse, I have what I fear may also be herpes, but the symptoms go away so quickly that I can never get to a doctor in time for a swab. It just started again today--it only hurts when I pee. It's a small spot just beside the opening of my vagina, and it looks red. Only ever one spot that lasts 24 hours, but recurs in the same spot every once in a while. It never stays long enough for me to be seen by a doctor.
Anyway, I'm fucking terrified. I don't know any other explanations for any of this. I don't use tampons, no IUD, only ever had full-on penetrative sex once and that was a couple months ago, but was promiscuous earlier in my life without vaginal penetration (some penetration attempts and some grinding aside). I have vaginismus that I am recovering from. I have never smoked or drank. I'm at a loss and I feel like the world is ending.
submitted by Better-Pause5183 to Healthyhooha [link] [comments]
I'm happy to link to a photo if anyone wants to see after this post. But basically I'm 27, and have had vulvar itching all my life. I've never had a Pap because of trauma reasons. The last time I saw my gyro (only ever had external exams) she said she didn't see anything of concern, but I can't remember if she said anything else, and this was 2 years ago.
I have either always had or had for at least a couple years this clearish/pink-skin-colored patch that's only seen when I part my inner labia. It's on my left side. It doesn't hurt. When I touch it, it's a bit bumpy/rough. It's not projecting outwards, but it does seem very slightly raised in a plaque-like way. It's squiggly, kind of. I thought of papillomatosis, of Fordyce spots, of everything. And yet I can't shake the vulvar cancer or intraepithelial fear.
To make matters worse, I have what I fear may also be herpes, but the symptoms go away so quickly that I can never get to a doctor in time for a swab. It just started again today--it only hurts when I pee. It's a small spot just beside the opening of my vagina, and it looks red. Only ever one spot that lasts 24 hours, but recurs in the same spot every once in a while. It never stays long enough for me to be seen by a doctor.
Anyway, I'm fucking terrified. I don't know any other explanations for any of this. I don't use tampons, no IUD, only ever had full-on penetrative sex once and that was a couple months ago, but was promiscuous earlier in my life without vaginal penetration (some penetration attempts and some grinding aside). I have vaginismus that I am recovering from. I have never smoked or drank. I'm at a loss and I feel like the world is ending.
2023.03.22 03:06 wrmono Material Graph: How to create & call external custom functions?
I've been having difficulties on finding a way to call external defined custom functions from within my code on the Custom Node on the Material Graph (Post-Processing Material or Material Function) and would like to know if there's really no way of doing that?
I would like to create a library where I define functions where I can call in a Custom Node, so I can isolate the shader logic from the functions. It's frustrating to feel forced to not do clean code inside a custom node, specially when I'm dealing with a large scale project.
Bonus question: As the only option, I created a struct with functions inside, but I was also not able to use pointers within them because it's not supported within HLSL. How do people get around that type of limitation? And why is HLSL limited like that? I assume there must be a decent reason for it.
Thank you very much!
submitted by wrmono to unrealengine [link] [comments]
I would like to create a library where I define functions where I can call in a Custom Node, so I can isolate the shader logic from the functions. It's frustrating to feel forced to not do clean code inside a custom node, specially when I'm dealing with a large scale project.
Bonus question: As the only option, I created a struct with functions inside, but I was also not able to use pointers within them because it's not supported within HLSL. How do people get around that type of limitation? And why is HLSL limited like that? I assume there must be a decent reason for it.
Thank you very much!
2023.03.22 03:04 elizamariposa Recurring Sore Throat & Strep G?
I have a couple posts on here about this topic, but may have finally gotten an answer… since my initial mono infection which involved severe swollen throat & lymph nodes on 2/13, I have had a swollen, dry, scratchy throat that comes and goes, but has never gone away. It flared up really badly last Thurs after a super stressful week and I got a strep test. Negative for Strep A but cultures came back today and I have an overgrowth of Strep G. Apparently, normally your body can fight this off, but mines likely struggling because its still fighting off mono. She offered me antibiotics, but its penicillin and that can cause full body rashes. Anyone go through something like this? Seeing an ENT on Thurs who can hopefully give me answers, but ugh why is everything with this dang virus so complicated?!
submitted by elizamariposa to Mononucleosis [link] [comments]
2023.03.22 02:58 No_Range_3720 Worried about having swollen lymph nodes in neck...
Just a month ago CT showed swollen lymph nodes in mesentric region. I don't really have many symptoms except maybe trouble breathing sometimes to weakness. I am scared regardless ..
submitted by No_Range_3720 to HypochondriasAnon [link] [comments]
2023.03.22 02:56 theswedking Swollen Lymph
40 year old male weighing 330lbs and is 5 feet 9 inches tall. Has hyperthyroidism and high blood pressure. On medication for hyperthyroidism, GERD, RLS, and psychiatric medication.
Presenting with swollen lymph nodes on right side behind jaw, there is generalized swelling, occasionally difficult swallowing, tender to touch with intermediate loacalized pain right jaw, been present for the last 3 weeks with no reduction in size or lessen of symptoms. Low grade fever and elevated temperature for the past e weeks as well. Present with no known infection i.e., URI, cold, cough, flu, ear infection, sinusitis, etc. The enlarged lymph nodes by happenstance occurred as a medication Prozac with increased and Cymbalta was discontinued. Unlikely to do with medication change.
Any thoughts? Lymphoma is out due to pain. Leukemia is possible but unlikely. A virus or bacterial infection but where, what, why, and how.
submitted by theswedking to AskDocs [link] [comments]
Presenting with swollen lymph nodes on right side behind jaw, there is generalized swelling, occasionally difficult swallowing, tender to touch with intermediate loacalized pain right jaw, been present for the last 3 weeks with no reduction in size or lessen of symptoms. Low grade fever and elevated temperature for the past e weeks as well. Present with no known infection i.e., URI, cold, cough, flu, ear infection, sinusitis, etc. The enlarged lymph nodes by happenstance occurred as a medication Prozac with increased and Cymbalta was discontinued. Unlikely to do with medication change.
Any thoughts? Lymphoma is out due to pain. Leukemia is possible but unlikely. A virus or bacterial infection but where, what, why, and how.